52904
12
Zoom out
Zoom in
Previous page
1/18
Next page
2005 HF Series User’s Manual 112505.0959
12
SWITCH ON / OSD
SWITCH ON / OSD
WELCOME MESSAGE
>
SWITCH ON CHANNEL
TV 2
SWITCH ON VOLUME
30
SWITCH ON PIC FMT
WIDESCREEN
POWER ON
STANDBY
VOLUME INDICATOR
YES
CHANNEL DISPLAY
ALL
3 DIGIT ENTRY
NO
WELCOME MESSAGE:
A welcome message (two lines, 20 characters) can appear on-screen when the set is
powered on. The message remains on-screen until the TV receives a command from
the remote or front panel or times out in 25 seconds. When the WELCOME
MESSAGE setup menu item is highlighted, cursor right or left to invoke the
MESSAGE sub-menu. Cursor up or down to select the desired MESSAGE sub-menu
item. Press MENU to return to the SETUP main menu.
SWITCH ON CHANNEL: TV 1-TV 125/HDMI 1/HDMI 2/SIDE AV/AV 1/AV 2/
/ STANDARD)
Specify the channel / input to which the TV will be tuned when it is powered on.
If STANDARD, the channel at power-on will be that to which the TV was tuned at
last power-down. If specified (e.g., 2, AV1, etc.), then that will always be the channel
/ input at power-on, until SWITCH ON CHANNEL is changed.
SWITCH ON VOLUME: (STANDARD / 0 - 99)
Specify the volume setting that takes effect when the TV is powered on.
If STANDARD, the volume at power-on will be the volume at which the TV was
prior to last power-down.
If specified as 0 - 99, that will always be the volume at power-on, until SWITCH ON
VOLUME is changed.
POWER ON: (STANDBY / FORCED ON)
STANDBY: The TV will be in standby mode when AC mains power is first
applied after having been disconnected.
FORCED ON: The TV will turn ON whenever AC mains power is applied. This
feature allows the TV’s power status to be controlled, for example, from an AC mains
breaker. In addition, the set cannot be put into standby with a guest remote or using
the front panel power key.
VOLUME INDICATOR: (NO / YES)
When VOLUME INDICATOR is set to YES, an OSD graphic appears that provides
visual verification (e.g. “VOLUME 15”) during volume adjustment, by means of
either the remote control, or the front panel (if it is not locked out).
CHANNEL DISPLAY: (NONE / NUMBER / LABEL / ALL)
Specifies which of the respective channel properties are displayed by the TV’s OSD
when a channel or input is first selected.
3 DIGIT ENTRY: (NO / YES)
o YES: The TV, upon receiving a remote control digit command, “expects” to
receive up to two more successive remote control digit commands (e.g. 123,
012, etc.) before tuning the intended channel. The television will display, in
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 32HF7543 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 32HF7543 in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info