145586
10
Zoom out
Zoom in
Previous page
1/39
Next page
10
Installation
Sound Setup menu
Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound
encoded programmes.
Dependent on your speaker configuration, the TV automatically switches to
the best surround sound mode when
Auto Surround is switched On.
However it is possible to overwrite this setting.
Wireless Surround
To make use of the wireless surround loudspeakers, use the cursor left/right
to select the same channel as you selected on the active loudspeaker.
(In the factory, channel 1 has been selected as default.)
Under most circumstances an interference free sound reproduction will be
guaranteed.
To avoid interference from external RF (wireless) equipment such as
headphones, RF audio, remote controls for lights it may be necessary to shift
to another wireless channel number. Do not use a mobile telephone close to
the wireless equipment as interference might occur.
In practice only 3 or 4 channels are available because at least a gap of two
channels is necessary to have enough separation.
Always be sure that the active surround speaker and the Wireless Surround
setting are switched to the same transmitting channel. Otherwise no sound or
only a distorted sound will be heard on the surround speakers.
When the TV is tuned to a channel in the neighbourhood of 864 MHz
(433 MHz in case you purchased a TV with a typenumber in the range 28-
32PW9615/01 or /58 or 32PW9765/01 or /58), the transmitter is switched off
because no RF surround sound is possible. This is necessary to avoid interfered
picture.You can improve the picture quality by using the suppressor aerial cable
supplied.
When no RF surround sound is possible or when there is too much
interference, use the wired back up solution with a 3.5 mm stereo jack. In this
case select Off in the Wireless surround menu item.
Connect the cable with the
PRE-AMP IN (TV) connector at the back of the
active surround loudspeaker and with the black and red
REAR R or L inputs
at the back of the TV.
Wireless headphone
When selecting the menu item
Wireless surround, also the menu item
Wireless headphone is displayed.
It indicates the transmitting channel in case you want to operate a wireless
headphone.The transmitting channel is automatically selected dependent on
the transmitting channel chosen for Wireless surround.
Important:
Sets with the typenumber 28-32PW9615/01 and /58 and 32PW9765/01 and /58
will only operate with a wireless headphone for 433 MHz.
All other typenumbers will only operate with wireless headphones for 864 MHz.
Sound setup
Auto Surround
Wireless Surround
Wireless headphone
Extra front speakers
Distance to front
Distance to rear
REAR
4934.3 gb /05 12-01-2000 14:37 Page 10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 28pw9615 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 28pw9615 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info