145583
27
Zoom out
Zoom in
Previous page
1/32
Next page
27Connect Peripheral Equipment
Stereo amplifier and two extra FRONT speakers
To enhance the sound reproduction of your TV you can connect two extra
speakers via an external amplifier.
& Connect the audio cables to the audio input of your amplifier and to
AUDIO L and R at the back of your TV.
The output level is controlled by the volume control of your TV.
Note: Switch off the TV and your audio amplifier before connecting them.
Set the audio amplifier’s volume to minimum.
é Select Extra front speakers Yes (Amp) in the Setup menu. See p. 7.
See Surround settings, p. 14 for the available Surround modes.
Adjust the volume of the audio amplifier.
You may make use of the Test tone function in the Surround Settings menu,
see p. 13, to have a reference of the loudness of the separate loudspeakers.
Note: Once you have adjusted the volume of the amplifier, do not change it while
watching TV as the whole configuration operates with the volume
adjustment of your TV.
REAR multimedia loudspeakers
Instead of connecting the two supplied rear loudspeakers to enjoy Dolby Pro
Logic Surround sound, you can also connect two other rear loudspeakers
with built in amplifiers (or an audio amplifier with rear loudspeakers).
& Connect the audio cables to the rear loudspeakers and to the Dolby
surround output S at the back of your TV as shown opposite.
There is only one cinch output for both speakers. Use a mono to stereo
adaptor.
Note: Switch off the TV and the rear loudspeakers before connecting them.
é Select Rear speakers Yes in the Setup menu. See p. 7.
See Surround settings, p. 14 for the available Surround modes.
Rear Surround Sound loudspeakers should always be located behind or to
either side of the listener at about 1 m above the seated listeners head.
Adjust the volume of the rear loudspeakers.
You may make use of the Test tone function in the Surround settings menu,
see p. 13, to have a reference of the loudness of the separate loudspeakers.
Note: Once you have adjusted the volume of the rear loudspeakers, do not change it
while watching TV as the whole configuration operates with the volume
adjustment of your TV.
Dolby Pro Logic Surround amplifier
& Connect the Dolby Pro Logic Surround amplifier to the AUDIO L and R at
the back of your TV.
é Select Extra front speakers No in the Setup menu. See p. 7.
The audio output is now independent of volume, equalizer and surround
settings.
Switch off the volume of the TV with the mute key ¬.
All volume settings, tone control and speaker connections have to be done
via the external Dolby Pro Logic amplifier.
Attention: the sound info on screen will not correspond with the actual sound
reproduction.
If you want to connect more equipment to your TV, consult your dealer.
Connect Extra loudspeakers / Amplifier
AUDIO
S
AUDIO
4914.1 gb /05 12-01-2000 10:38 Page 27
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 28pw9535 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 28pw9535 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info