145487
8
Zoom out
Zoom in
Previous page
1/144
Next page
This menu allows you to balance the sound
between the different speakers.
& Press
H, select SOUND (J) and press L.
The SOUND menu appears :
é Select TEST and press
L to set it to ON.
A continuous sound is emitted in turn from
each channel : left, right, centre and rear
(depending on the selected surround mode).
Remark : the rear channel only appears if surround
speakers are connected to the TV set.To change
the surround mode, press the
) key.
Select BALANCE, CENTRE or REAR and use
the
KL keys to adjust the level of each
channel independently.The sequence stops
while the level is being changed and then
automatically starts up again.
To stop the test, press
H.
Levels may also be adjusted without using the test
signal.
( To exit from the menus, press
R.
8
Adjusting the sound level
Adjusting the sound
& Press H, select the SOUND option (J) and
press
L.The SOUND menu appears :
é Use IJ keys to select a setting and keys
KL to adjust.
Note: to access the AVL, CORDLESS and DELAY
settings (hidden at the bottom of the screen) hold
down J key.The CORDLESS and DELAY settings
are only availables if surround loudspeakers are
connected to the TV set.The DELAY setting only
appears in DOLBY PRO LOGIC and HALL
SURROUND modes.
Once the necessary adjustments have been
made, select the option STORE and press
L
to store them.
To exit from the menus, press
R.
Description of the settings:
• LEVEL: to balance the sound between the
different speakers (see below).
• EQUALIZER: to adjust the sound tone (from
bass: 120 Hz to treble: 10 kHz).
• SURROUND MODE: to select the different
surround modes (see next page).
• DELTA VOLUME (volume difference): allows
you to compensate for the volume differences
between the different programmes or the EXT
sockets.This setting is available for
programmes 1 - 40 and the EXT sockets.
• STORE:stores the sound settings.
AVL (Automatic Volume Leveller): automatic
volume control used to avoid sudden
increases in volume, particularly when
changing programmes or during
advertisements.
• CORDLESS: to adjust the different parameters
of the cordless surround speakers (see p.17).
• DELAY: to adjust the delay of surround effect
on the rear loudspedakers (31 is the default
value).
• PICTURE
• SOUND
• FEATURES
• INSTALL
SOUND
• LEVEL
• EQUALIZER
SURROUND MODE
• DELTA VOLUME
• STORE
• AVL
• CORDLESS
• DELAY
120 HZ
500 HZ
1500 HZ
5 KHZ
10 KHZ
• PICTURE
• SOUND
• FEATURES
• INSTALL
SOUND
• LEVEL
• EQUALIZER
SURROUND MODE
• DELTA VOLUME
• STORE
• AVL
• CORDLESS
DELAY
TEST
BALANCE
CENTRE
REAR
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 28pw6516 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 28pw6516 in the language / languages: English, French, Polish, Turkish as an attachment in your email.

The manual is 7,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info