51045
8
Zoom out
Zoom in
Previous page
1/32
Next page
6
æ Positioning the television set
Place your TV on a solid,stable surface.
To avoid any dangerous situations and operating fault,do not place anything
on the TV set and leave a space of at least 5cm around the appliance.
 Connections
• Insert the aerial plug into the M socket at the rear of the set.
You can improve the picture quality by using the suppressor aerial cable supplied.
• Insert the mains plug into a wall socket (220-240 V / 50 Hz).
For the modem connection, please refer to page 25 (connection not yet required).
ê Surround loudspeakers
If your TV is fitted with FM cordless surround speake r s ,please re fer to page 26.
Connect the 2 Surround loudspeakers as illustrated opposite.
The loudspeakers should be located at the rear or on either side of the
listener (always connect 2 loudspeakers).The positive wire (the one with
the black line) to the red loudspeaker connection,the negative wire to the
black loudspeaker connection.
® Remote control
Insert the two R6-type batteries (supplied) making sure they are the right
way round.
Press the TV key of the remote control to be sure it is in the TV mode.
A green indicator lights-up around the TV key.
In an effo rt to help protect the env i r o n m e n t ,the batteries supplied with this telev i s i o n
do not contain mercury or nickel cadmium.Please do not discard your used batteri e s
if you have access to a recycling facility (if in doubt, consult your dealer).
Card reader
If you have a Smartcard for ONdigital channels, insert it in the slot as
indicate opposite,making sure it is the right way round (gold chip facing
you, arrow pointing to the slot).
Ú Switching on
• Press the on/off key to switch on the television.
A green indicator comes on and the screen lights up. If the television
remains in standby mode, press the P key on the remote control.
The first time the TV set is switched on,it will generate the following
message;‘Welcome. Press select on your remote to get started’.
Press the key in the centre of the cursor to activate.
If the message does not appear, the television is in analogue mode.
Press the key on the remote control to switch the TV from analogue
to digital mode.
The TV indicator flashes when you use the remote control.
Installing the television set
For a first time installation, we would recommend you use the quick start guide provided.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 28DW6734 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 28DW6734 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info