Stereo amplifier and two extra FRONT speakers
To enhance the sound reproduction of your TV you can connect two extra
speakers via an external amplifier.
& Connect the audio cables to the audio input of your amplifier and to
AUDIO L and R at the back of your TV.
The output level is controlled by the volume control of your TV.
Note: Switch off the TV and your audio amplifier before connecting them.
Set the audio amplifier’s volume to minimum.
é Select Extra front speakers Yes (Amp) in the Setup menu. See p. 13.
See Surround settings, p. 20 for the available Surround modes.
“ Adjust the volume of the audio amplifier.
You may make use of the Test tone function in the Surround Settings menu,
see p. 20, to have a reference of the loudness of the separate loudspeakers.
Note: Once you have adjusted the volume of the amplifier, do not change it while
watching TV, the volume level of all the speakers is changed with the volume
control of the TV.
Dolby Pro Logic Surround amplifier
& Connect the Dolby Pro Logic Surround amplifier to the AUDIO L and R at
the back of your TV.
é Select Extra front speakers No in the Setup menu. See p. 13.
The audio output is now independent of volume, equalizer and surround
settings.
“ Switch off the volume of the TV with the mute key ¬.
All volume settings, tone control and speaker connections have to be done
via the external Dolby Pro Logic amplifier.
Attention: the sound info on screen will not correspond with the actual sound
reproduction.