476604
33
Zoom out
Zoom in
Previous page
1/47
Next page
PrimeSuite xxHFL4373D/10 Page 33
Smart Clone
With Smart Clone it is possible to copy to/from
a USB device TV the configuration data and
channel list data. Place a USB Memory stick in
the USB side I/O connector of the TV.
*USB device should be formatted as FAT or FAT32.
USB to TV
1. select [Smart Clone] and press OK.
2. select [USB to TV] and press OK.
3. Clone data will be loaded from USB
device into TV. To activate the loaded
settings, wait until the OSD message is
displayed to remove the power cord.
4. Remove and re-insert the power cord.
TV to USB
1. select [Smart Clone] and press OK.
2. select [TV to USB] and press OK.
3. Clone data will be loaded from TV into
USB device.
4. wait until the OSD message returns to its
earlier state before removing the USB
device
RF Download
Instead of using a USB memory device to do
cloning and firmware update, this upgrading is
also possible using the RF infrastructure. This
is supported by SmartInstall (Philips Hospitality
RF Download mechanism) and allows a
simultaneous upgrade of all installed
televisions.
[SW Types]
Defining the software parts to be upgraded:
[SSB Firmware] TV Firmware
[SSB NVM] TV settings
[StandBy Firmware] Firmware for the
StandBy CPU
[ThemeTV] All graphic files for
ThemeTV
[Express Box] Firmware SBB106
[Welcome Logo] Graphic file
[Hotel Information] Graphic file
[All] All of above (except
standby software)
[Program Info]
This function is to set the necessary DVB
parameters to locate the proper RF download
channel :
*[Frequency] Frequency of MUX (default: 0706)
*[Medium] Cable or Antenna (DVB T/C)
[Service ID] # # # # # (00001)
[ONID] # # # # # (00001)
[NID] # # # # # (00001)
[TSID] # # # # # (00001)
**[Symbol Rate] # . # # # (6.900)
**[Modulation] QAM16, QAM32, QAM64, QAM128,
QAM256
*Mandatory items
**Mandatory items, but DVB-C only
Above parameters must match head-end configuration
Start Download
To manual start a RF download action:
1. select [RF Download] and press OK.
2. select [Start Download] and press
OK.
The download action will start and search if
valid content is found on the RF network.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 26HFL4373D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 26HFL4373D in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info