476604
24
Zoom out
Zoom in
Previous page
1/47
Next page
PrimeSuite xxHFL4373D/10 Page 24
[Download Program]
Set selected Download Program as source for
clock time.
Time Offset]
Offset time added to the downloaded clock time:
[Slider]: -12 to 12 hr
[Buzzer Volume]
Audio Clock Time Alarm (buzzer):
[Set]: Off, On
[Daylight saving]
Set the Daylight saving options:
[Set]: Off, On
[Feature settings]
[Multi RC]
This function allows that up to four televisions can
be installed in a room whereas every TV will listen
to its own RC. Once the TV is set, also every RC
can be set to remember its connected TV:
[Off] This function is not used; all TVs will
listen to a ‘blue’ RC.
[Blue] The TV will listen to a ‘blue’ RC.
Press and hold both the menu and blue
button on the RC for more than two
seconds.
[Green] The TV will listen to a ‘green’ RC.
Press and hold both the menu and green
button on the RC for more than two
seconds.
[Yellow] The TV will listen to a ‘yellow’ RC.
Press and hold both the menu and yellow
button on the RC for more than two
seconds.
[Red] The TV will listen to a ‘red’ RC.
Press and hold both the menu and red
button on the RC for more than two
seconds.
[MyChoice]
With MyChoice it is possible to activate two
channel rings: R0 when MyChoice PIN is valid,
and R1 if not.
[Off]: Single channel map as configured
during channel installation.
[On] Channel ring R0 to be available to
guest in case of valid PIN entered; R1 if
not.
[ThemeTV]
With ThemeTV it is possible to activate a
customizable UI to select upto 15 different themes
that contains Channle references. ThemeTV can
be presented on the display by means of pressing
the ThemeTV button on the RC, or automatically
after starting up the TV:
[On]: Show ThemeTV on the display after
pressing the ThemeTV button on the
RC.
[Off] ThemeTV disabled.
[Startup] Show ThemeTV on startup and able
to showd ThemeTV by pressing the
TTV button on the RC.
[VSecure]
VSecure is the hospitality content scrambling
method used by the Philips Hospitality TVs. With
its internal VSecure Authorization key a VSecure
Unprotect key can be generated. If this VSecure
Unprotect key is stored in the TV, the TV is able
to descramble protected content. Loading the
VSecure Unprotect key can be done by USB
memory device or via DVB RF:
[Mode]
[Stand alone]:
The VSecure Unprotect key is to be
stored once via USB and will remain
available until manual erasing it.
[Connected]:
The VSecure Unprotect key is to be
send via serialXpress RF and will
remain valid until power down or
receiving a successive VSecure
Unprotect key.
[RF Static]:
The VSecure Unprotect key is to be
stored via RF and will remain valid
until manual erasing it or receiving a
successive VSecure Unprotect key.
[Load key to USB]
[Action] Place a USB memory device in the
USB side I/O.
Press ‘>’ or OK’ to copy the VSecure
Authorization key to the USB memory
device
[Load key to TV]
[Action] Place a USB memory device with a
valid VSecure Unprotect key in the
USB side I/O.
Press ‘>’ or OK’ to copy the VSecure
Unprotect key to the USB memory
device
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 26HFL4373D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 26HFL4373D in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info