578379
26
Zoom out
Zoom in
Previous page
1/56
Next page
Forgotten your Child lock code?
If you forgot your code, you can override the current code and
enter a new code.
1. Press
and select
Setup
and press
OK
.
2. Select
Satellite settings
>
Child lock
>
Change code
and
press
OK
.
3. Enter the overriding code
8888
.
4. Now enter a new Child lock code and enter it again to
confirm.
7.5
Satellite installation
Installing satellites
About installing satellites
This TV has a built-in satellite DVB-S/DVB-S2 receiver. Connect
the cable from your satellite dish directly to the TV. Use a
coaxial cable fit for connecting a satellite antenna dish. Make sure
your satellite dish is perfectly aligned before you start the
installation.
Up to 4 satellites
You can install up to 4 satellites (4 LNBs) on this TV. Select the
exact number of satellites you wish to install at the start of the
installation. This will speed up the installation.
Unicable
You can use a Unicable system to connect the antenna dish to
the TV. Select if you are installing satellites for a Unicable system,
for 1 or for 2 satellites at the start of the installation.
Installing
You can install your satellites during the initial TV setup. The
satellite installation follows the TV channel installation. If you only
watch satellite channels, you can skip the TV channel installation.
You can always start a new satellite installation from the Setup
menu.
To install satellite channels . . .
1. Press
and select
Setup
and press
OK
.
2. Select
Search for satellite
and press
OK
.
3. Select
Install satellites
and press
OK
.
4. The TV shows the current installation setting. If the current
setting corresponds with the satellite installation you want, you
can start searching for satellites. Select
Search
and press
OK
. Go
to step 5. If the current setting is not the setting you want, select
Settings
and press
OK
. Go to step 4b.
4b - In the Settings menu, select the exact number of satellites
you want to install. Or, if you use a Unicable setup, select
Unicable for 1 satellite
or
Unicable for 2 satellites
according
the number of satellites you want to install for Unicable. Select
the setting you want and press
OK
.
4c - If the exact number of satellites is set or you completed the
Unicable settings, select
Search
and press
OK
.
5. The TV will search for satellites available on the alignment of
your antenna dish. This may take a few minutes. If a satellite is
found, its name and reception strength are shown on screen. If a
channel package is available for any of the satellites found, you
can select the package you want.
6. To install the channels of the satellites found, select
Install
and
press
OK
. The TV shows the number of channels and radio
stations found.
7. To store the satellite settings, all satellite channels and satellite
radio stations, select
Finish
and press
OK
.
Channel packages
About channel packages
Satellites can offer channel packages that bundle free channels
(free-to-air) and offer a sorting that suits a country. Some
satellites offer subscription packages - a collection of channels
you pay for.
If you choose a subscription package, the TV might ask you to
select a Quick or Full installation.
Select
Satellite operator channels only
to install the channels of
the package only or select
All satellite channels
to install the
package and all other available channels too. We recommend a
Quick installation for subscription packages. If you have
additional satellites that are not part of your subscription
package, we recommend a Full installation. All installed channels
are put in the channels list All.
Unicable setup
The Unicable system
You can use a Unicable system to connect the antenna dish to
the TV.A Unicable system uses one cable to connect the satellite
dish to all satellite receivers in its system. Unicable is typically
used in apartment buildings. If you use a Unicable system, the TV
will ask you to assign a user band number and corresponding
frequency during the installation. You can install 1 or 2 satellites
with Unicable on this TV.
If you notice some missing channels after a Unicable installation,
another installation might have been done at the same moment
on the Unicable system. Do the installation again to install the
missing channels.
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 24PHK4000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 24PHK4000 in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 24PHK4000

Philips 24PHK4000 User Manual - German - 59 pages

Philips 24PHK4000 User Manual - Dutch - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info