476603
30
Zoom out
Zoom in
Previous page
1/47
Next page
PrimeSuite xxHFL4373D/10 Page 30
8 Press [Start] to continue.
9 If a preset Network Frequency is not
available, or the Network Frequency
Mode is set as manual, Enter the
Network Frequency and press [Done] to
continue.
Press [Cancel] if no DVB-C to install
(only DVB-T and Analogue).
10 Once the channel list is configured, the
TV shows how many digital and analog
channels are captured and returns to the
TV Setup OSD.
11 Press [Done] > [Skip] > [Finish] > [Close]
to return to the TV Setup Menu. If PBS Mode
is [On], the Guest menu is displayed.
More Channel Settings
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Channel settings], then
press OK.
3. Select a setting to adjust and press
<OK>:
[Languages]: Set the required DVB
languages.
[Primary audio]: Sets the Primary
audio channel to the selected country
language.
[Secondary audio]: Sets the
Secondary audio channel to the selected
country language.
[Primary subtitles]: Sets the Primary
subtitles to the selected country
language.
[Secondary subtitles]: Sets the
Secondary subtitles to the selected
country language.
[Primary text]: Sets the Primary text to
the selected country language.
[Secondary text]: Sets the Secondary
text to the selected country language.
[Visually impaired]: Sets the feature
Visually impaired to support:
[Off]:
[Speakers]:
[Headphones]:
[Speakers + headphones]:
[Preferred audio format]: Sets the
feature preferred audio format:
[Standard]:
[Advanced]:
[Mono/Stereo]: Sets the feature audio
format:
[Mono]:
[Stereo]:
Press OK to confirm your choice.
Channel installallation
Before starting to install channels specific
settings must be set to get the channels to be
installed (see reinstall, page 29)
1 Press [Home/Menu] > [TV Setup]> [OK].
2 Select [Setup] > [Channel settings], then
press OK.
3. Select a setting to adjust and press
<OK>:
[Channel installation]: Configure the
proper installation settings:
[Automatic Channel Update]: This TV
can automatically rescan the entire
channel configuration once every day if
this feature is set and the TV is in
Standby mode.
[Off]: No automatic updating
[On]: At TV clock 5.00 AM channel
updating starts
[Channel Update Message]: Once the
TV has updated its channel list due to an
Automatic Channel Update, this OSD
will inform about the occurrence
[Off]: No updating message
[On]: After an update cycle an OSD
message will be displayed once the TV
is switched on.
[Digital: Reception test]: Test scan
Will install channels that are available in the
setted MUX frequency
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 22HFL4373D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 22HFL4373D in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info