476603
23
Zoom out
Zoom in
Previous page
1/47
Next page
PrimeSuite xxHFL4373D/10 Page 23
[Enable Subtitles]
Enables or disables the use of subtitles in a
DVB broadcast channel:
[Off]: No subtitles services available (Prison
Mode)
[On]: Subtitles services available
[Enable Channel Map]
Select Channel Map to be viewed:
[Native]: Show standard default channel
map
[BDS]: To be used only if a STB is
connected
[Power settings]
[Power on]
The power on function allows the TV to enter a
specific mode ([On], [Standby], or [Last status]) of
operation when the mains power is activated (cold
start):
[On]: The TV will always turn on (show startup
channel) after the mains power is
activated.
[Standby]: When set, the TV will always turn to
standby (status as defined in Low power
standby option) after the mains power is
activated.
[Low power standby]
The Low power standby option defines the TV to
enter a specific standby mode after pressing the
On/Off button on the remote control. To wake-up
the TV both On/Off button on the RC or TV can
be pressed:
[Fast]: The TV will quickly turn on (show startup
channel. (This mode is having more
power consumption then the Green
mode).
[Green]: The TV will slower turn on (show
startup channel) then the Fast. (This
mode is having less power consumption
then the Fast mode).
[Smart power]
The power consumption for the Smart power
mode is defined by the Smart Picture setting in
the TV Setup part.
[Off]: The TV will start with Standard Smart
Picture setting, but the setting can be
changed in the guest setup mode.
[On]: The TV will start with default Smart
Picture setting and Smart Picture setup
and is not selectable in the guest setup
mode.(with this the power consumption
mode is predictable).
[Auto switch off]
Enables or disables the use of automatic switch
off the TV if no RC action is noticed after 240
minutes:
[Off]: TV will not switch off after 240 minutes
[On]: TV will switch of after 240 minutes
[Delayed reboot]
Enables or disables the use of delayed
standby:
[Off]: No delay added when guest presses
‘Off’ button.
[On]: Delay added when guest presses ‘Off’
button before going into standby; in case
of a wrong guest interaction, activating
the TV after this will be done directly
without any startup delay.
[Clock settings]
[Display Standby]
Defines the brightness level for the Clock LCD
backlight if the TV is in Standby mode:
[Set]: Off, 1, 2, 3, 4, 5
[Display On]
Defines the brightness level for the Clock LCD
backlight if the TV is in On mode:
[Set]: Off, 1, 2, 3, 4, 5
[Time Setting]
This is only available if the Time Download is set
to Manual and can be used to set the clock with
the remote control:
[Set]: Time entry field [xx:xx Hr]
Time to be set by using arrow keys and numeric
buttons
[Time Download]
Select source for clock time:
[Automatic]:
Clock time is retrieved from the
Download Program channel.
[Manual]:
The clock time is set using the Time
Setting option.
[Download Country]
Set selected country as source for clock time.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 22HFL4373D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 22HFL4373D in the language / languages: English as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info