33223
22
Zoom out
Zoom in
Previous page
1/29
Next page
c Press C .
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
Store:
press OK
d Select the entry field ’PROG.’ with the D or C
button. Select ’Record prepared’ with the B or
A button.
e Confirm with the OK button.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
f To end, press the TIMER s button.
g Place a cassette in the machine.
E If you have not connected the satellite receiver yet, use a
scart cable to connect scart socket EXT. 1 on the
TV-VIDEO Combi to the corresponding scart socket on
the satellite receiver.
h Programme the satellite receiver with the required
information (programme number on the SAT receiver,
start time, end time).
DThe information on how to programme your satellite
receiver can be found in the instruction manual for
your satellite receiver.
Activating a recording from the SAT
receiver with OTSR (OTSR = One Touch Sat
Recording)
In the previous paragraph we described how to prepare the
TV-VIDEO Combi for recording from the SAT receiver by
means of the menu (step a through f ). OTSR will allow
you to record a SAT programme fast and easy with just one
button press.
a Press the Sr/q buttons at the same time until the
timer light on your TV-VIDEO Combi starts blinking. It will
blink three times and will then stay alight.
Your TV-VIDEO Combi is now prepared for recording. The
start and end of the recording is controlled via the scart
cable.
DEach time you programme a recording on the
satellite receiver, you must prepare your TV-VIDEO
Combi for recording. Each time you prepare your
TV-VIDEO Combi for a satellite recording a
TIMER-block will be reserved and the TIMER light at
the front will blink.
DIf the TIMER light does not blink, you have not set
the clock or all TIMER-blocks have been used up.
Please read the paragraph ’Setting the time and
date’ or ’How to clear a programmed recording
(TIMER)’.
DIf you want to cancel the programmed SAT
recording, follow the procedure described in the
paragraph ’How to clear a TIMER’.
How to check or change a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons B or A and confirm with the C
button.
c Select the TIMER you want to check or change with the
B or A button and confirm with the OK button.
d Select the entry field with the D or C button.
e Change any information with the B or A button or
with the 0-9 buttons.
DUnder ’LP’, use the B or A button to select the
recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMER s button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons B or A and confirm with the C
button.
c Select the TIMER you want to clear with the menu
buttons B or A .
d Press the CLEAR button.
e Switch off with the TIMER s button.
20
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 21PV715 39 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 21PV715 39 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 21PV715 39

Philips 21PV715 39 User Manual - Italian - 34 pages

Philips 21PV715 39 User Manual - Portuguese - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info