145384
12
Zoom out
Zoom in
Previous page
1/12
Next page
ß
12
Poor reception
The proximity of mountains or high
buildings may be responsible for
ghost pictures, echoing or shadows.
In this case, try manually adjusting
your picture: see "fine tuning" (p.6) or
modify the orientation of the outside
aerial. Does your antenna enable you
to receive broadcasts in this
frequency range (UHF or VHF band)?
In the event of difficult reception
(snowy picture) switch the
NOISE.REDUCT on the FEATURES
menu to ON. (p.7).
No picture
Have you connected the aerial socket
properly? Have you chosen the right
system? (p. 6) Is the contrast or the
brightness baddly adjusted ? Press
and readjust the PICTURE
menu. Poorly connected
euroconnector cables or aerial
sockets are often the cause of picture
or sound problems (sometimes the
connectors can become half
disconnected if the TV set is moved
or turned). Check all connections.
Picture adjustment
If the picture is not adjusted properly
or if you have trouble obtaining a
clear picture, select one of the smart
control presets (p. 3),go into
the PICTURE menu and modify one
of the settings.The setting is stored
automatically.The picture is too blue
or too red! Adjust the COLOUR
TEMP (p. 7).
Peripheral equipment gives a black
and white picture
You have not selected the right
socket with the key: S-VHS2(or
S-VHS3) instead of EXT2 (or EXT3).
To play a video cassette,check that it
has been recorded under the same
standard (PAL,SECAM, NTSC) which
can be re p l ayed by the video re c o rd e r.
No sound
If on certain channels you re c e i v e a
p i c t u r e but no sound,this means that
you do not have the correct TV system.
Modify the SYSTEM setting (p.6 ) .
Remote control
The TV set does not react to the
remote control; the indicator on the
set no longer flashes when you use
the remote control? Replace the
batteries.
Standby
When you switch the TV set on it
remains in standby mode and the
indication LOCKED is displayed
when you use the keys on the TV set?
The LOCK function is switched on
(see p. 7).
If the set receives no signal for 15
mins,it automatically goes into
standby mode.
The set consumes energy when it is
switched on.To save electricity, we
recommend that you switch the TV
set off using the ON/OFF key.
Miscellaneous
The menus appear in a foreign
language? Select the LANGUAGE
option in the INSTALL menu (p.4).
Still no results?
If your TV set breaks down, never
attempt to repair it yourself:contact
your dealer's after-sales service.
Recycling directive
Your TV set uses materials which are reusable or which can be recycled.
To minimise the amount of waste in the environment, specialist
companies recover used sets for dismantling and collection of reusable
materials (consult your dealer).
Tips
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 21pt5324 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 21pt5324 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info