52347
5
Zoom out
Zoom in
Previous page
1/15
Next page
In the Configuration menu, various settings and features of the TV can be adjusted.
Switch On/OSD: In this sub-menu the behavior
of the TV after switching on and the behavior of
the On Screen Display can be selected.
Picture/Sound: In this sub-menu, the Picture and
Sound settings of the TV can be selected.
Security: In this sub-menu, the Security settings of
the TV can be configured.
Control: In this sub-menu, the Control settings of
the TV can be configured.
CC/V-Chip: In this sub-menu, the Close Caption
and V-Chip settings of the TV can be configured.
In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be
selected.
Welcome Message: Press Cursor Left/Right to
display the Welcome message entry menu:
o Welcome Message
o Line 1
o Line 2
o Clear
With the Cursor Up/Down buttons you can set the
message characters.
Switch On Channel:
T
his item sets the television’s
channel at switch on.
Switch On Volume: This item sets the television’s
volume at switch on. Use the Right/Left Cursor
buttons on the Remote Control to adjust.
Switch On Pic Fmt:
T
his item sets the television’s
Picture Format at switch on. Use the Right/Left
Cursor buttons on the Remote Control to adjust.
Power On: The Power On menu function defines the behavior of the television whenever AC Power is applied.
The valid states are "FORCED ON", "LAST STATUS" and “STANDBY”.
o When “FORCED ON”, the television can only be switched OFF by means of the main switch or a set-
up remote control or by ESP function (Energy Saving Programmability controls the maximum
continuous viewing time allowed by the control system).
o When “LAST STATUS”, the television switches on the previous status, ON or Stand-by.
o When “STANDBY”, the television always switches on in Stand-by.
Volume Indicator: To display volume indicator when adjusting volume, select "YES". Select “NO” to hide the
volume indicator.
Channel Display: Program Display values can be: Number, Label, All, None.
Digit Timeout: This is the time-out to enter the second digit of channel number (example: for channel number
10 and above).
3 Digit Entry: To allow for 3-digit entry of channel numbers via the Remote Control, select “YES”. Select
“NO” to allow only 2-digit entry of channel numbers via Remote Control.
- 5 -
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 20ft3310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 20ft3310 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info