9
Y
our TV can automatically set itself for
local area (or Cable TV) channels. This
makes it easy for you to select only the TV
stations in your area when the CHANNEL
(+), (–) buttons are pressed.
Note: Make sure the antenna or cable signal
connection has been completed before AUTO
PROGRAM is activated.
1
Press the MENU button on the
remote to show the on-screen menu.
2
Press the CURSOR UP or DOWN
buttons to scroll through the on-screen
menu until the word INSTALL is
highlighted.
3
Press the CURSOR RIGHT button
to display the INSTALL menu fea-
tures.
4
Press CURSOR UP or DOWN but-
tons to scroll the Install features until
the words AUTO PROGRAM are
highlighted.
5
Press the CURSOR RIGHT button
to start the Auto Program scanning of
channels. Auto Programming will store
all available channels in the TV’s
memory then tune to the lowest avail-
able channel when done.
6
When finished, press the SYSTEM
MENU (OSD) button to remove the
menu from the TV’s screen.
HOW TO AUTOMATICALLY PROGRAM CHANNELS
When CABLE is selected, channels 1-125
are available.
When ANTENNA is selected, channels 2-
69 are available.
When AUTO is selected, the TV will auto-
matically set itself to the correct mode
based on the type of signal it detects when
the AUTO PROGRAM feature is activated.
HELPFUL HINT
More...