666079
27
Zoom out
Zoom in
Previous page
1/32
Next page
25
7. Trou
bl
es
h
ootin
g
& FAQs
7. Troubleshooting &
FAQs
7.1 Troubleshooting
This page deals with problems that can
be corrected by a user. If the problem
still persists after you have tried these
solutions, contact Philips customer
service representative.
Common Problems
No Picture (Power LED not lit)
 Make sure the power cord is
plugged into the power outlet and
into the back of the monitor.
 First, ensure that the power button
on the front of the monitor is in the
OFF position, then press it to the
ON position.
No Picture (Power LED is White)
 Make sure the computer is turned
on.
 Make sure the signal cable is
properly connected to your
computer.
 Make sure the monitor cable has
no bent pins on the connect side. If
yes, repair or replace the cable.
 The Energy Saving feature may be
activated
Screen says
Attention
Check cable connection
 Make sure the monitor cable
is properly connected to your
computer. (Also refer to the Quick
Start Guide).
 Check to see if the monitor cable
has bent pins.
 Make sure the computer is turned
on.
AUTO button doesn't function
 The auto function is applicable only
in VGA-Analog mode. If the result is
not satisfactory, you can do manual
adjustments via the OSD menu.
Note
The Auto Function is not applicable in
DVI-Digital mode as it is not necessary.
Visible signs of smoke or sparks
 Do not perform any troubleshooting
steps
 Disconnect the monitor from mains
power source immediately for safety
 Contact with Philips customer
service representative immediately.
Imaging Problems
Image is not centered
 Adjust the image position using
the “Auto” function in OSD Main
Controls.
 Adjust the image position using
the Phase/Clock of Setup in OSD
Main Controls. It is valid only in VGA
mode.
Image vibrates on the screen
 Check that the signal cable is
properly securely connected to the
graphics board or PC.
Vertical flicker appears
 Adjust the image using the “Auto
function in OSD Main Controls.
 Eliminate the vertical bars using
the Phase/Clock of Setup in OSD
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 19B4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 19B4 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 19B4

Philips 19B4 User Manual - German - 30 pages

Philips 19B4 User Manual - Dutch - 30 pages

Philips 19B4 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info