33163
23
Zoom out
Zoom in
Previous page
1/28
Next page
f When all information is correct, confirm with the OK
button.
E Press STANDBY to start recording
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the OK button.
DA programmed recording can only start when the
TV-VIDEO Combi is switched to standby.
g After you have confirmed with the OK button, use the
TIMER s button to exit the menu.
DThe programming information has been stored in a
TIMER block.
h Make sure that the cassette you have put in can be
recorded on.
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
a Select the TV channel you want to record from.
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
d Press TIMER s .’PLEASE WAIT...’ will briefly
appear at the bottom of the screen.
Next, a highlighted title line will appear.
DIf ’NO TIMER INFORMATION ON THIS
PAGE’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
e A cursor (h) will appear at the first programme line. Use
the P- B and AP+ buttons to move the cursor (h)to
the TV programme you want to record.
DIf you want to cancel this function, press
TELETEXT e .
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã è Store:
« press OK
g For changing the timer information, select the entry field
with the DSr or SqC button. Change the
information with the P- B or AP+ button or with the
number buttons 0-9 .
DUnder ’REP.’, use the P- B or AP+ button to
select daily or weekly programming.
ONCE: Recording only once.
Mo-Fr: Recording from Monday to Friday.
Mo-Su: Recording from Monday to Sunday.
WEEKL: Recording every week on the same day.
DUnder ’VPS/PDC switch ’VPS/PDC’ on or off with
the P- B or AP+ button.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the P- B or AP+ button.
h When all information is correct, confirm with the OK
button.
E Press STANDBY to start recording
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the OK button.
DA programmed recording can only start when the
TV-VIDEO Combi is switched to standby.
i After you have confirmed with the OK button, use the
TIMER s button to exit the menu.
DThe programming information has been stored in a
TIMER block.
j Make sure that the cassette you have put in can be
recorded on.
21
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 14PV503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 14PV503 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 14PV503

Philips 14PV503 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info