33157
7
Zoom out
Zoom in
Previous page
1/28
Next page
The remote control
STANDBY m Switch off : To switch off set, interrupt menu
function, interrupt a programmed recording
(TIMER)
FM SEARCH Radio: To search for radio channels
RADIO ON Radio: To switch on the radio and to switch
between radio and TV mode
ALARM ON Switch on function: To switch the radio-
and/or buzzer-alarm on or off
SLEEP Sleep timer: To select the switch-off time in 15
minutes intervals
0-9 Number buttons:0-9
CLEAR Delete : To delete last entry or clear
programmed recording (TIMER)
TIMER s TIMER: To make a manual TIMER
programming or to alter or clear a
programmed TIMER
MENU Menu : To call up or end main menu
OK Store/Confirm: To store or confirm entry
DSr Select: Cursor left
SqC Select: Cursor right
AP+ Select: One line up
P- B Select: One line down
DSr/SqC Volume: To regulate the radio and TV volume
ABP q/r Programme number: To select a programme
number up or down
y Volume off: To switch the volume on or off
z Previous programme number: To select the previous programme number
PLAY G Playback : To play a recorded cassette
H Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
STOP h Pause/Stop: To stop the tape, except while a TIMER-recording is being made
I Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward
scanning
INDEX E Index search: In combination with H / I : to search for previous/next recording
on the cassette
RECORD/OTR n Record: To record the programme selected
STILL R Still picture: To stop the tape and show a still picture
Coloured TELETEXT buttons:To select TELETEXT page directly
nred To select page/chapter shown in red at the bottom of the screen
ngreen To select page/chapter shown in green at the bottom of the screen
nyellow To select page/chapter shown in yellow at the bottom of the screen
nblue To select page/chapter shown in blue at the bottom of the screen
OPERATING INSTRUCTIONS IN BRIEF
Front of the set
8 Power switch : To switch off the machine
Beware: If you switch off with the power switch, TIMER-recordings are not possible!
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P r/q
Programme number : To select programme number up or down
Sr/q
Volume: To regulate the volume
ON/OFF
Radio: To switch on the radio ot to switch between radio and TV
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
5
Record: To record the programme selected
G
Playback : To play a recorded cassette
?
Pause/Stop: To stop the tape, except while a TIMER-recording is being made
AUDIO
Audio input socket left/right stereo
VIDEO
Video input socket : To connect a camcorder or videogames
w
Headphones socket: To connect headphones
Back of the set
2 Aerial input socket: To connect the aerial cable
EXT. 1
Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
The display at the front of the machine
In the display the time, the radio frequency or the radio programme number will be shown.
Also, these lights may light up in the display:
n Recording light: Will light up when a recording is being made
ALARM n
Radio alarm: Will light up when the radio alarm has been activated
nBUZZER
Buzzer alarm: Will light up when the buzzer alarm has been activated
k
Timer light: Will light up when a Timer recording has been programmed; will blink when a Timer
recording cannot start
Congratulations! You now own one of the most sophisticated
and simple-to-use TV-VIDEO Combinations on the market.
With this TV-VIDEO Combi you can record and play
VHS-standard cassettes.
Please take the time to read this operating manual before
using your TV-VIDEO Combi.
Safety instructions and other notes
ADanger: High voltage!
Do not remove the top cover as there is a risk of an electrical
shock!
AThe TV-VIDEO Combi does not contain any components that can
be repaired by the customer. To switch off the TV-VIDEO Combi
completely you must switch it off with the power switch.
BMake sure that air can circulate freely through the ventilation
slots on the TV-VIDEO Combi.
BMake sure that no objects or liquids enter the TV-VIDEO Combi.
If liquid is spilt into it, disconnect the TV-VIDEO Combi
immediately from the power supply and call the After-sales
Service for advice.
BThe TV-VIDEO Combi should not be used immediately after
transportation from a cold to a hot area or vice versa, or in
conditions of extreme humidity.
After unpacking the TV-VIDEO Combi, it should be allowed to
acclimatize for at least three hours before installation.
C These operating instructions have been printed on nonpolluting
paper.
C Deposit old batteries at the relevant collection points.
C Please make use of the facilities available in your country for
disposing of the packaging of the TV-VIDEO Combi in a way that
helps to protect the environment.
C This electronic equipment contains many materials that can be
recycled. Please inquire about the possibilities for recycling
your old set.
DVIDEO Plus+ and PlusCode are registered trademarks of
Gemstar Development Corporation. The VIDEO Plus+ system is
manufactured under licence from Gemstar Development
Corporation.
So that you can identify your machine in the event of theft,
enter the serial number (PROD.NO) here. The serial number is
printed on the type plate fixed at the rear of the set.
MODEL NO. 14PV400-404-405-406-503-505/07
PROD.NO: ......
This product complies with the requirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.
Interference
The Department of Trade and Industry operates a Radio
Investigation Service to help TV licence holders improve
reception of BBC and ITC programmes where these are being
spoilt by interference.
If your dealer cannot help, ask at a Main Post Office for the
booklet ’How to Improve Television and Radio Reception’.
Technical information
Measurements in cm (W / H / D): 39.2 / 40.7 / 39.8
Power consumption (Standby) : less than 48W (less than 6W)
Voltage : 198-264V 50Hz
Headphones : Output resistance less than 120 Ohms maximum
output voltage more than 2.6V at 120 Ohms
Emergency interrupt
You can use the STANDBY m button on the TV-VIDEO Combi or
the remote control to interrupt any function. If you want to
interrupt a running Timer recording, hold the STANDBY m
button for several seconds.
So if you are having operating problems, you can just interrupt
the function and start again.
And you can practise operating your set without any worries.
No matter which buttons you press, you cannot damage it.
OPERATING INSTRUCTIONS PHILIPS 14PV400-404-405-406-503-505/07
1
Special functions on your TV-VIDEO Combi
If a TV channel which transmits TXT/PDC is stored under programme number
P01’, time and date will automatically be taken from the TXT/PDC information.
Crystal Clear video has become the synonym for outstanding picture quality
combining Philips’ very latest technologies: Natural Colour, Studio Tracking
System, Digital Studio Picture Control and laser-cut video heads.
Philips has developed a system which produces the best possible playback
quality. It reduces disturbance on old, worn video cassettes, and emphasises
the detail on very good quality cassettes.
When you have plugged your TV-VIDEO Combi into the mains, you will be
welcomed with an OSD picture. All you have to do is follow the instructions in
the "intelligent help line" for the next step. Enjoy the Automatic TV channel
search/save function and the automatic time adjustment.
Automatic Volume Leveller. This prevents a sudden increase of the volume, for
example, during commercials.
The precision tape drive from Philips with a rewind time of 100 seconds (E180)
and automatic tape length recognition.
Your Philips TV-VIDEO Combi combines perfect TV and VIDEO picture and sound
quality with full digital radio and alarm clock functionality.
If you wish to be waken up by TV, radio, buzzer or your favorite video tape you
can programme your Combi to be switched on at a desired time.
By using the information stored in the Teletext pages you can programme
recordings on the TV-VIDEO Combi in just a few convenient steps.
2
Important for the United Kingdom
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
a Remove fuse cover and fuse.
b Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
c Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution
board should not be greater than 5A.
DNote: * The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a 13A
socket elsewhere.
How to connect a plug:
The wires in the mains lead are coloured in accordance with
the following code:
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
d The BLUE wire must be connected to the terminal which
is marked with the letter ’N’ or coloured BLACK.
e The BROWN wire must be connected to the terminal
which is marked with the letter ’L’ or coloured RED.
f Do not connect either wires to the earth terminal in the
plug which is marked with the letter ’E’ or by the safety
earth symbol \or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not imply over the
two wires.
Connecting the cables
a Insert the aerial plug into the 2 socket.
b Insert the plug of the mains cable into the wall socket.
c Adjust the radio aerial at the back of the machine to
obtain the best possible reception quality by positioning
the ends of the aerial in opposite directions.
d If the small red lamp at the front of the set is not alight,
please switch on the set. The power switch 8 is
located on the left side panel of the set.
Connecting a decoder or other equipment
You can also connect additional equipment to the EXT. 1
socket. For instance, a satellite receiver, decoder or
camcorder.
1. CONNECTING YOUR TV-VIDEO COMBI
4
Initial installation
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b Close the battery compartment.
c If the aerial (antenna) has been connected to the
TV-VIDEO Combi and the radio aerial has been adjusted,
press the OK button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
Searching...
CHANNELS FOUND: 06
Radio channels stored: 7
//////,,,,,,,,,,,,,,,,,,,,,
Wait until all TV channels have been found. This can take
several minutes. When the TV channel search is ready,
Installation comp.’ will briefly appear on the
TV screen.
DIf you have connected a decoder, you must install it
as described in the next section.
DIf you have connected a satellite receiver, please
read the section ’satellite receiver’.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your TV-VIDEO Combi. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a Select the TV channel for which you want to use the
decoder with the ABP q/r button on the TV-VIDEO
Combi or the number buttons 0-9 on the remote control.
b Press the MENU button on the remote control. The main
menu will appear.
c Select the line ’Installation’ with the P- B or
AP+ buton and confirm with the SqC button.
d Select the line ’Manual store’ with the P- B or
AP+ button and confirm with the SqC button.
e Select the line ’Decoder’ with the P- B or AP+
button.
MANUAL STORE
Channel/Frequency FREQU.
Search 123
Fine tuning (,,,,=,,,,$
Name edit xxx
Programme number 01
Decoder OFF
ã Exit:
« press MENU
f Select function ’ON’ with the DSr or SqC
button. When you select OFF’, the function will be
switched off.
g Confirm with the OK button.
h To end, press the MENU button.
Your decoder has now been allocated to this TV channel.
i Press the MENU button again.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Manual store’.
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button.
2. INSTALLING YOUR TV-VIDEO COMBI
5
c Select the line ’Manual store’ with the P- B or
AP+ button and confirm with the SqC button.
MANUAL STORE
Channel/Frequency FREQU.
Search 123
Fine tuning (,,,,=,,,,$
Name edit xxx
Programme number 01
Decoder OFF
ã Exit:
« press MENU
d In the line ’Channel/Frequency’, select the
display for:
FREQU.: frequency
CCH: channel
SCH: special channel
e If you know the frequency or channel of the desired TV
channel, you can enter the data in line ’Search’ with
the digit buttons 0-9 .
DIf you don’t know the frequency or channel of the TV
channel of your choice, press the SqC button to
start the channel search.
f In the line ’Programme number select the
programme number you want e.g.: ’01’, using the
DSr or SqC button.
g If you want to change the TV channel name, press the
SqC button in line ’Name edit’.
E Select the character you want to change with the
DSr or the SqC button. Change the character
with the P- B or the AP+ button. Select the next
character in the same way.
E To confirm the information, press the OK button.
h If you want to change the automatic tv channel setting,
select the line ’Fine tuning’.
With the DSr or SqC button you can vary the
automatic tv channel setting. Important: This re-tuning is
only necessary and useful in special cases, e.g.: when
there are stripes on the picture with cable-TV systems.
i Press the OK button to store the TV channel.
DIf you want to search for further TV channels, start
again at step e.
j To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Manual store’.
Manual radio channel search
a Press the MENU button. The main menu appears.
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button.
c Select the line ’Radio store’ with the P- B or
AP+ button and confirm with the SqC button.
RADIO STORE
Frequency search 123.4
Programme number 01
ã Exit:
« press MENU
d If you know the frequency of the desired radio channel,
you can enter the data in line ’Frequency search
with the digit buttons 0-9 .
DIf you don’t know the frequency of the radio channel
of your choice, press the SqC button to start
the channel search.
e In the line ’Programme number select the
programme number you want e.g.: ’2’, using the
DSr or SqC button.
f Press the OK button to store the radio channel.
DIf you want to search for further radio channels,
start again at step d.
g To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Radio store’.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT. 1 .
To do this, select the channel number ’E1’ with the
ABP q/r button. You will have to select the channels to be
received by the satellite receiver on the receiver itself.
6
Special installation functions
You can select one of the following installation functions in
order to adapt your TV-VIDEO Combi to your own specific
requirements.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again,
then follow the instructions below.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button.
c Select the line ’Autoinstall’ with the P- B or
AP+ button.
d Press the SqC button. The ’Automatic TV channel
search’ starts.
Searching...
CHANNELS FOUND: 06
Radio channels stored: 7
//////,,,,,,,,,,,,,,,,,,,,,
e When the TV channel search is complete,
Installation comp.’ will appear on the
screen.
How to search for a TV channel manually, you can read in the
section ’Manual TV channel search’.
DIf you have programmed a recording (TIMER), a wake-up
timer or a sleep-timer, you can’t select the function
Autoinstall’.
DAutomatic Channel Installation:
Some cable companies or broadcasters offer the
possibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to
select it, will appear on the screen.
This set will recognize and install TV channels with ’ACI’
automatically.
TV channels will be stored from programme number 1
onward.
If ’ACI’ cannot identify a TV channel, you can search for it
using the method as described in the section ’Manual TV
Channel Search’.
Searching for new TV channels
a Press MENU . The main menu will appear.
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button.
c Select the line ’Add new channels’ with the
P- B or AP+ button and confirm with the SqC
button.
Channel search will start.
d To store the TV channel, press OK .
e Repeat step d, until you have found all desired TV
channels.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you cannot select
the function ’Add new channels’.
Allocating a channel number
a Press the MENU button. The main menu will appear.
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button.
c Select the line ’Sort channels’ with the P- B or
AP+ button and confirm with the SqC button.
SORT CHANNELS
01 zzz 04 aaa
02 yyy 05 bbb
03 xxx 06 ccc
ã Exit: To move:
« press MENU press OK
d With the P- B , AP+ , DSr or SqC button,
select the TV channel to which you want to allocate a
programme number and press the OK button.
e With the P- B , AP+ , DSr or SqC button,
shift the TV channel to the programme number you wish
to allocate to this TV channel and press the OK button.
f Repeat steps dto euntil you have allocated a
programme number to all the required TV channels.
g To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Sort channels’.
7
Delete a TV Channel
a Press the MENU button. The main menu appears.
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button .
c Select the line ’Sort channels’ with the P- B or
AP+ button and confirm with the menu button
SqC .
SORT CHANNELS
01 zzz 04 aaa
02 yyy 05 bbb
03 xxx 06 ccc
ã Exit: To move:
« press MENU press OK
d With the P- B , AP+ , DSr or SqC button,
select the TV channel you want to delete and press the
CLEAR button.
e Repeat step d, until you have deleted all the required
TV channels.
f To end, press the MENU button.
DIf you have programmed a recording (TIMER), a
wake-up timer or a sleep-timer, you can’t select the
function ’Sort channels’.
Setting the language
You can select the language for the on-screen display (OSD).
a Press the MENU button on the remote control. The main
menu will appear.
MAIN MENU
Picture
Sound
Setup
Tape
Installation
ã Exit:
« press MENU
b Select the line ’Installation’ with the P- B or
AP+ button and confirm with the SqC button.
INSTALLATION
Add new channels
Sort channels
Autoinstall
Manual store
Radio store
Set clock
Language ENGLISH
ã Exit:
« press MENU
c Select the line ’Language’ with the P- B or AP+
button.
d Select your language with the DSr or SqC
button.
e To end, press the MENU button.
8
Setting the time and date
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
P- B or AP+ and confirm with the button SqC .
c Select the line ’Set clock’ with the P- B or
AP+ button and confirm with the SqC button.
SET CLOCK
Time 15:36
Year 2000
Month 06
Date 08
Smart clock ON
ã Exit:
« press MENU
d Check the time in line ’Time’. If required, please change
the time with the 0-9 buttons on the remote control.
e Check ’Year’, ’Month and ’Date’ in the same way.
You can switch between entry fields with P- B or
AP+ button. Confirm with the OK button.
f To end, press the MENU button.
DWhen you are watching TV and when the TV-VIDEO
Combi is switched to standby, the time will appear in
the display at the front panel of your Combi.
Automatic time and date setting
(SMART CLOCK)
DIf a television programme, which transmits TELETEXT, is
stored with programme number ’P01’, time and date will
be set automatically.
DThe time will automatically be adjusted to winter time and
summer time.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’Installation’ with the buttons
P- B or AP+ and confirm with the button SqC .
c Select the line ’Set clock’ with the P- B or
AP+ button and confirm with the SqC button.
d Select the line ’Smart clock’ with the menu buttons
P- B or AP+ .
e Switch the function on with the menu buttons DSr or
SqC .
f Confirm with the OK button.
g To end, press the MENU button.
9
SUMMARY OF USER GUIDE
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
MAIN MENU
Picture
Sound
Setup
Tape
Installation
ã Exit:
« press MENU
User guide (OSD)
The OSD (On-screen display) shows the various functions in
the form of a menu on the television screen. You can then
choose the settings you require. There is a summary of the
menus on this page. The main button functions are displayed
in a help line along the bottom of the screen.
E To call up the menu: With the MENU button.
E To select a line: With the P- B or AP+ button.
E To select within a line: With the DSr or SqC
button.
E To enter or change your selection: With the 0-9 ,
DSr or SqC button.
E To enter or change your selection in the TIMER entry
columns: With the P- B or AP+ button.
E To cancel: With the MENU button.
E To save: With the OK button.
E To confirm: With the SqC button.
E To exit the menu: With the MENU menu button.
E To confirm the messages in red on the screen: Press the
OK button.
E You can switch the machine on with the ABP q/r ,
z or 0-9 button or by putting in a cassette.
PICTURE
Brightness (,,,,,,,,,
Colour (,,,,,,,,,
Contrast (,,,,,,,,,
Sharpness (,,,,,,,,,
Store as pref. NO
ã Exit:
« press MENU
Chapter ’TV FUNCTIONS’
SOUND
Volume (,,,,,,,,,
Auto volume cont. ON
Store as pref. NO
ã Exit:
« press MENU
Chapter ’TV FUNCTIONS’
SETUP
Clock brightness BRIGHT
Parental control OFF
Display MAX
ã Exit:
« press MENU
Chapter ’ADDITIONAL FUNCTIONS’
TAPE
Tape speed SP
Tape counter LEFT
Repeat play OFF
Jitter (,,,,=,,,,$
Tracking (,,,,=,,,,$
Cleaning
ã Exit:
« press MENU
Chapter ’PLAYBACK FUNCTIONS’
3. IMPORTANT NOTES FOR OPERATION
10
Important notes for operation
E We suggest that, from now on, you switch off your
TV-VIDEO Combi with the STANDBY m button on the front
of the set or on the remote control.
When the set is in the standby mode, a small red lamp at
the front of the set will be alight.
E You can switch on with the ABP q/r or z button,
the 0-9 buttons or by inserting a cassette.
AAttention: If you use the power switch 8 on the side
panel, you switch off the set completely from the mains
power supply. No programmed recordings will then be
made. The red lamp at the front of the set will not be
alight. After some time, the date and clock settings will be
lost.
We advice you to keep your TV-VIDEO Combi connected
to the mains at all times to ensure that programmed
recordings can be made and that the television works
normally. The power consumption will be low.
E Attention: If you switch off the appliance with the power
switch 8 , make sure that you have removed the tape
by pressing the ? button.
E If you diconnect your TV-VIDEO Combi from the mains,
TIMER and channel information will remain stored for
about 1 year and clock information will remain stored for
30 minutes.
11
How to read TELETEXT
E Press the TELETEXT e button to switch the TXT decoder
on and off. The TV-VIDEO Combi is now receiving the TXT
of the TV channel currently selected.
E To store the current page as preferred page, press the
OK button.
The next time you call up TELETEXT, you will
automatically turn to this page.
E If you want to select an other page, type in the number of
the page with the digit buttons 0-9 . With the colour
buttons on your remote control you can directly select
the page numbers shown at the bottom of the TV screen.
Extra TELETEXT functions
To use the extra TELETEXT functions, press the MENU button,
when you are in TELETEXT.
E To enlarge the print, select the symbol g’ and confirm
with the OK button.
E To switch off the TELETEXT decoder temporarily, select
the symbol ’d and confirm with the OK button.
E To call up a TELETEXT sub-page:
a Select the symbol ’}’ and confirm with the OK
button.
b Enter the page number of the sub-page with the
0-9 -buttons (e.g.: 0123).
E To call up concealed information, select the symbol ’b
and confirm with the OK button.
E To stop the pages from being turned over, select the
symbol ’f’ and confirm with the OK button.
E To show TELETEXT transparently, select the symbol ’-
and confirm with the OK button.
13
To switch the radio on, press the RADIO ON button. You can
switch between radio and TV mode with the RADIO ON button.
You can switch the radio off with the STANDBY m button.
DYou can be waken up by the radio. Read the paragraph
’Switch on function (WAKE-UP TIMER)´ in the chapter
’Additional functions´.
DYou can not call up any menu function while the radio
function is switched on.
Selecting a radio channel
Select the required radio channel with the ABP q/r button
or with the digit buttons 0-9 on the remote control. The
programme number will appear in the display.
Searching a radio channel
You can search for radio channels that have not been stored,
while you are listening to the radio.
a Press the FM SEARCH button.
DThe TV-VIDEO Combi will search for the next radio
channel. The corresponding frequency will appear
in the display.
b Repeat step a to search for the next radio channel.
Storing a radio channel
a If you want to store a radio channel, switch to TV-mode
with the RADIO ON button.
b Press the MENU button. The main menu appears.
c Select the line ’Installation’ with the menu
buttons P- B or AP+ and confirm with the menu
button SqC .
d Select the line ’Radio store’ with the menu buttons
P- B or AP+ and confirm with the menu button
SqC .
e In line ’Programme number select the programme
number you want the radio channel to be stored on, using
the SqC or DSr button.
f Press the OK button.
g To end, press the MENU button.
Displaying the frequency
E Press the OK button while you are listening to the radio.
You will see the frequency of the radio channel you are
listening to on the display.
5. RADIO FUNCTIONS
14
Playing a cassette
a Put a cassette into the cassette slot.
b Press the PLAY G button.
E If you press the STOP h button once, the TV-VIDEO
Combi will switch to pause. To stop, press the STOP h
button again.
E To eject the cassette, press the ? button on the
TV-VIDEO Combi or press the STOP h button on the
remote control several seconds.
DBefore transportation, make sure that no cassette is
in the TV-VIDEO Combi.
DIf you insert an erase protected cassette, the
TV-VIDEO Combi will automatically start playback.
DSome hired cassettes may have poor picture or
sound quality. This is not a fault in your machine.
Please read ’Eliminating picture interference’.
DSome functions will automatically switch off after a
while (for example, pause, still picture, picture
search). This helps to protect the cassette and
avoids wasting power.
Playing an NTSC cassette
With this set you can play cassettes that have been recorded
on another video recorder in the NTSC standard (for example,
American cassettes).
DSome special features (for example, still picture) are not
possible while you are playing an NTSC cassette.
Tape position indication
DPress the OK button to display the current tape position.
DTo change the type of tape position display, proceed as
follows:
a During playback, press the MENU button.
b Select the line ’Tape’ with the menu buttons P- B or
AP+ and confirm with the SqC button.
c Select the line ’Tape counter’ with the menu
buttons P- B or AP+ .
d With the menu buttons DSr or SqC select
USED’ to check the time used, or LEFT’ to check the
time left on the tape.
e Confirm with the OK button.
Searching for tape position with the picture
(picture search)
a While a cassette is playing, press the H (reverse) or
I (forward) button once or several times.
b To stop at a certain picture, press the PLAY G button.
DDuring picture search, the picture quality may not be
so good and there will be no sound.
Still picture
a Press the STILL R button. A still picture will appear on
the screen.
b Each time you press STILL R again, the picture will
move on one step.
Searching for tape position without the
picture (wind and rewind)
a Stop the tape with the STOP h button.
b Press the H (reverse) or I (forward) button.
c To stop at a certain picture, press the STOP h button.
Instant View
With this function you can switch to picture search during
wind and rewind.
a If you hold the H (rewind) or I (wind) button
during wind or rewind, you will switch to picture search.
b When you release the button, the TV-VIDEO Combi will
automatically switch back to rewind or wind.
6. PLAYBACK FUNCTIONS
15
Selecting the recording speed (SP or LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Press the MENU button. The main menu appears.
b Select the line ’Tape’ with the P- B or AP+ button,
and confirm with the SqC button.
c Select the line ’Tape speed’ with the P- B or
AP+ button.
d Select the required recording speed with the DSr or
SqC button.
DLP: Long Play = half recording speed (double
recording time).
SP: Standard Play = normal recording speed.
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
automatically be selected.
e Confirm with the OK button.
f To end, press the MENU button.
18
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme’s start time (for example, 20.15 and VPS 20.14),
you must enter ’20.14’ as the start time.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with ’VIDEO Plus+’)
All the information required for a programming is contained in
the PlusCode programming number.
a Press the TIMER s button on the remote control.
b Select the line ’VIDEOPlus’ with the P- B or
AP+ button and confirm with the SqC button.
c Enter the entire PlusCode programming number (up to 9
digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
If you make a mistake, you can clear your instructions
with the CLEAR button.
VIDEOPLUS
CODE REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
123456((( ONCE
0-9 Store:
press OK
d In line ’REPEAT’ select the kind of programming
required with the P- B or AP+ button.
ONCE: recording only once
Mo-Fr: recordings every day from Monday to Friday.
Mo-Su: recordings every day from Monday to Sunday.
WEEKLY: recordings every week on the same day of
the week.
8. PROGRAMMED RECORDING (TIMER)
19
e Confirm with the OK button. Your programming details
will then appear on the TV screen.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã è Store:
« press OK
DIf VIDEO Plus+ does not recognise the TV channel,
P??’ will appear on the TV screen. Instead of
P??’, you can select the programme number you
want with the number buttons 0-9 .
DIf ’Code error’ appears on the TV screen, this
means you entered an incorrect PlusCode number
or the incorrect date. Correct your instructions or
end with the TIMER s button.
DIf ’Daily error appears on the TV screen, the
date was incorrectly entered.
DThe TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
DWhen you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
DIf the end of the cassette is reached during a
recording, the TV-VIDEO Combi will automatically
eject the cassette.
DIf you forgot to insert cassette, No cassette
will appear.
DIf you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected.
f Press the OK button.
E Press STANDBY to start recording
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the OK button.
DA programmed recording can only start when the
TV-VIDEO Combi is switched to standby.
g After you have confirmed with the OK button, use the
TIMER s button to exit the menu.
Programming a recording
(without ’VIDEO Plus+’)
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons P- B or AP+ and confirm with the
SqC button.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:--- - -----
ã Exit: Start:
« press TIMER press è
c Press the SqC button.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã è Store:
« press OK
d Select the entry field with the DSr or SqC
button.
e Enter information with the menu buttons P- B or
AP+ or with the digit buttons 0-9 .
DUnder ’REP.’, use the P- B or AP+ button to
select daily or weekly programming.
ONCE: Recording only once.
Mo-Fr: Recording from Monday to Friday.
Mo-Su: Recording from Monday to Sunday.
WEEKL: Recording every week on the same day.
DUnder ’VPS/PDC switch ’VPS/PDC’ on or off with
the P- B or AP+ button.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the P- B or AP+ button.
20
f When all information is correct, confirm with the OK
button.
E Press STANDBY to start recording
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the OK button.
DA programmed recording can only start when the
TV-VIDEO Combi is switched to standby.
g After you have confirmed with the OK button, use the
TIMER s button to exit the menu.
DThe programming information has been stored in a
TIMER block.
h Make sure that the cassette you have put in can be
recorded on.
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want record. All the required information for
recording will be transferred and stored in a TIMER block. You
can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
a Select the TV channel you want to record from.
b Press TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
d Press TIMER s .’PLEASE WAIT...’ will briefly
appear at the bottom of the screen.
Next, a highlighted title line will appear.
DIf ’NO TIMER INFORMATION ON THIS
PAGE’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
e A cursor (h) will appear at the first programme line. Use
the P- B and AP+ buttons to move the cursor (h)to
the TV programme you want to record.
DIf you want to cancel this function, press
TELETEXT e .
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã è Store:
« press OK
g For changing the timer information, select the entry field
with the DSr or SqC button. Change the
information with the P- B or AP+ button or with the
number buttons 0-9 .
DUnder ’REP.’, use the P- B or AP+ button to
select daily or weekly programming.
ONCE: Recording only once.
Mo-Fr: Recording from Monday to Friday.
Mo-Su: Recording from Monday to Sunday.
WEEKL: Recording every week on the same day.
DUnder ’VPS/PDC switch ’VPS/PDC’ on or off with
the P- B or AP+ button.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the P- B or AP+ button.
h When all information is correct, confirm with the OK
button.
E Press STANDBY to start recording
will appear in the display. If the programmed recording
should start within the next few minutes, press
STANDBY m . If the programmed recording should start at
a later point in time, press the OK button.
DA programmed recording can only start when the
TV-VIDEO Combi is switched to standby.
i After you have confirmed with the OK button, use the
TIMER s button to exit the menu.
DThe programming information has been stored in a
TIMER block.
j Make sure that the cassette you have put in can be
recorded on.
21
How to check or change a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons P- B or AP+ and confirm with the
SqC button.
c Select the TIMER you want to check or change with the
P- B or AP+ button and confirm with the OK button.
d Select the entry field with the DSr or SqC
button.
e Change any information with the P- B or AP+ button
or with the 0-9 buttons.
DUnder ’LP’, use the P- B or AP+ button to
select the recording speed ’SP’ or ’LP’.
f Confirm with the OK button.
g To end, press the TIMER s button.
h Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a Press the TIMER s button on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
menu buttons P- B or AP+ and confirm with the
SqC button.
c Select the TIMER you want to clear with the menu
buttons P- B or AP+ .
d Press the CLEAR button.
e Switch off with the TIMER s button.
22
Selecting the display brightness
You have a choice of several levels of display brightness
(clock, radio frequency, programme number).
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the P- B or AP+ button
and confirm with the SqC button.
SETUP
Clock brightness BRIGHT
Parental control OFF
Display MAX
ã Exit:
« press MENU
c Select the line ’Clock brightness’ with the
P- B or AP+ button.
d Select one of the options with the SqC or
DSr button: OFF’ (display is switched off),
STB.OFF (display is switched off in standby mode),
LOW’, ’MIDDLE’, HIGH’, BRIGHT’.
e Confirm with the OK button.
f To end, press the MENU button.
Parental control
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
DYou can make programmed recordings while the parental
control is on.
a Press the MENU button. The main menu will appear.
b Select the line ’Setup’ with the P- B or AP+ button
and confirm with the SqC button.
SETUP
Clock brightness BRIGHT
Parental control OFF
Display MAX
ã Exit:
« press MENU
c In the line ’Parental control select ’ON’ with
the DSr or SqC button.
d Confirm with the OK button.
e To end, press the MENU button.
Keep the remote control in a safe place.
f Switch off the machine with the STANDBY m button.
DIf you want to switch off parental control, select
OFF’ in line Parental control’.
DIf a button is pressed with activated parental
control, ’Parental Control active’ will
appear.
DIf you have activated parental control, you can only
operate the TV-VIDEO Combi with the remote
control.
DIf you want to eject a cassette with activated
parental control, press the STOP h button several
seconds.
9. ADDITIONAL FUNCTIONS
23
Switching the On-screen display (OSD) on
or off
You can switch the On Screen Display of the current operating
information on or off.
a Press the MENU button. The main menu appears.
b Select the line ’Setup’ with the menu buttons P- B or
AP+ and confirm with the SqC button.
SETUP
Clock brightness BRIGHT
Parental control OFF
Display MAX
ã Exit:
« press MENU
c Select the line ’Display’ with the menu buttons
P- B or AP+ .
d Select one of the options indicated with the menu buttons
SqC or DSr .
MAX: The OSD appears for a few seconds each time an
operating mode is selected and then disappears.
MIN: The OSD is reduced to a minimum.
PROGR.: The programme number is always shown.
COUNTER: The tape position is always shown.
e Confirm with the OK button.
f To end, press the MENU button.
DWith the OK button you can superimpose the On
Screen Display of current operating mode on the TV
screen.
Continuous playback
You can automatically play a cassette again and again. When
the end of the tape or the recording has been reached, it will
rewind and start again.
a Press the MENU button. The main menu appears.
b Select the line ’Tape’ with the menu buttons P- B or
AP+ . Confirm with the menu buton SqC .
TAPE
Tape speed SP
Tape counter LEFT
Repeat play OFF
Jitter (,,,,=,,,,$
Tracking (,,,,=,,,,$
Cleaning
ã Exit:
« press MENU
c Select the line ’Repeat play’ with the menu buttons
P- B or AP+ .
d Select ’ON’ with the menu buttons DSr or
SqC . If you select ’OFF’, the function will be
switched off.
e Confirm with the OK button.
f Press the MENU button.
24
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Philips 14PV406 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Philips 14PV406 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Philips 14PV406

Philips 14PV406 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info