Manual Philips 14PT6441 (page 4 of 36) (English)

107076

Zoom out

Zoom in

1/36

IMPORTANT SAFETY INSTRUCTIONS

Read before operating equipment

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings. Install in accordance

with the manufacturers instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and third grounding prong.

The wide blade or third prong are provided for your safety.When

the provided plug does not fit into your outlet, consult an electrician

for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with a cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the appara

tus. When a cart is used, use caution when moving

the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has been dropped.

15. This product may contain lead and mercury. Disposal of these materi-

als may be regulated due to environmental considerations. For dispos-

al or recycling information, please contact your local authorities or

the Electronic Industries Alliance: www.eiae.org

16. Damage Requiring Service - The appliance should be serv-

iced by qualified service personnel when:

A. The power supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled into the appli-

ance; or

C. The appliance has been exposed to rain; or

D. The appliance does not appear to operate normally or

exhibits a marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

17. Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties of

its cabinet design.

• Do not compromise these design standards by applying excessive

pull force to the front, or top, of the cabinet which could ultimately

overturn the product.

• Also, do not endanger yourself, or children, by placing electronic

equipment/toys on the top of the cabinet. Such items could unsus-

pectingly fall from the top of the set and cause product damage

and/or personal injury.

18. Wall or Ceiling Mounting - The appliance should be

mounted to a wall or ceiling only as recommended by the manufac-

turer.

19. Power Lines - An outdoor antenna should be located away from

power lines.

20. Outdoor Antenna Grounding - If an outside antenna is

connected to the receiver, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built up

static charges.

Section 810 of the National Electric Code, ANSI/NFPA No. 70-1984,

provides information with respect to proper grounding of the mast

and supporting structure, grounding of the lead-in wire to an anten-

na discharge unit, size of grounding connectors, location of antenna-

discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode. See Figure below.

21. Object and Liquid Entry - Care should be taken so that

objects do not fall and liquids are not spilled into the enclosure

through openings.comply with recommended international global safe-

ty standards for tilt and stability properties of its cabinet design.

22. Battery Usage CAUTION - To prevent battery leakage that

may result in bodily injury, property damage, or damage to the unit:

• Install all batteries correctly, with + and - aligned as marked on

the unit.

• Do not mix batteries (old and new or carbon and alkaline, etc.).

• Remove batteries when the unit is not used for a long time.

ANTENNA LEAD IN WIRE

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

GROUND CLAMP

ELECTRIC SERVICE EQUIPMENT

Note to the CATV system installer: This

reminder is provided to call the CATV system

installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

Example of Antenna Grounding

as per NEC - National Electric Code

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philips 14PT6441 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philips 14PT6441 Manual

Product: