A: To avoid less than optimum display even when LightFrame™ is manually activated from the OSD screen,
it will automatically switch off when:
- A mode change occurs: for example, when the monitor changes resolution or refresh rate.
- The monitor enters sleep mode.
- The monitor is powered off and on again.
Q: Can LightFrame™2 highlight simultaneously highlight multiple screen areas?
A: No. LightFrame™ 2 operates in a single rectangular screen area.
RETURN TO TOP OF THE PAGE
Technical Specifications*
CRT
• Size and deflection 17 inch / 41 cm ; 90° deflection angle
• Dot pitch 0.27 mm
• Horizontal pitch 0.23 mm
• Tube type
Shadow mask, flat square, high contrast, anti-glare, anti-static,
anti reflection, light transmission 47%
• Phosphor P22
• Recommended display area 12.0" x 9.0" / 306 x 230 mm
• Maximum display area 12.9" x 9.7" / 327 x 245 mm
SCANNING
• Horizontal scanning 30 - 71 KHz
• Vertical scanning 50-160 Hz
VIDEO
• Video dot rate 108 MHz
• Input impedance
- Video 75 ohm
- Sync 2.2 kOhm
• Input signal levels 0.7 Vpp
file:///D|/rita/LF2/LF2/LFa1/multi_manual/english/107S/PRODUCT/PRODUCT.HTM (9 of 12) [8/29/2001 2:58:57 PM]