Manual Philco CDV210HH8 (page 8 of 26) (English)

501682

Zoom out

Zoom in

1/26

–

Setup

Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for broadcasting,

see “RF Output Channel” section on page 6.

Select your language when turning this unit on for the first time.

Then press [

B] to go to next step.

Press [B] to start Auto Set Up.

STANDBY-ON

Press [MENU] to select “CHANNEL SET UP”.

Then press [B] to go to next step.

Select “MANUAL SET UP”.

Then press [B] to go to next step.

Select the channel to be added or deleted.

Select “ADD” or “DELETE”.

To exit the menu

To Preset the Channel Again

1) Press [MENU] until the main menu appears.

Select “CHANNEL SET UP” by using

[K//L]

, then press

[B]

Select “AUTO SET UP” by using [K//L], then press [B]. After scan-

ning, the tuner stops on the lowest memorized channel.

To Change the On-Screen Language

Press

[MENU]

until the main menu appears.

2) Select “LANGUAGE SELECT” by using [K/L], then

press [B].

3) Select “ENGLISH” , “FRANCAIS” or “ESPAÑOL” by using [K/

L] then press [CLEAR/C.RESET].

To Select a Channel

You can select a channel by using the number buttons or

[

SKIP/CH.

L].

Notes for using the number buttons:

• When selecting cable channels which are higher than 99, enter

channel numbers as a three-digit number.

(for example: 117, press [1], [1], [7])

• You must precede single-digit channel numbers with a zero. (for

example: 02, 03, 04 and so on)

• If the clock is not set, the CLOCK SET screen appears when you

press [MENU]. In this case, go to step 2.

CLEAR/

C. RESET

Preparation for Use

Hint

• Repeat these steps only if either there was a power failure or this unit

has been unplugged for more than 30 seconds.

Please wait for a few minutes.

After scanning...

• The tuner stops on the lowest memorized channel.

• You can select only the channels memorized in this unit by using

[SKIP/CH. G///K, H//L] (or [CHANNEL K///L]).

• If “AUTO SET UP” appears on the TV screen again, check the cable con-

nections. Then, press [B] once again.

Yes Press [MENU] to exit.

• Refer to “Hint for Cable Box or Satellite Box” section on page 6.

Do you connect the cable from the cable box or the satellite box to the

unit’s ANT-IN jack?

Hint

• To go back one step, press [s] (during steps 2 to 7).

• Your clock setting will be lost if either there is a power failure or this

unit has been unplugged for more than 30 seconds.

• If the clock is not set, the “CLOCK SET” screen appears when you

press [MENU]. In this case, press [MENU] again.

LANGUAGE SELECT

B ENGLISH [ON]

FRANCAIS

ESPAÑOL

CH 01

AUTO SET UP

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

CHANNEL SET UP

AUTO SET UP

B MANUAL SET UP

MANUAL SET UP

CHANNEL 30 (CATV)

ADD

MANUAL SET UP

CHANNEL 30 (CATV)

DELETE

- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

CLOCK SET

MONTH DAY YEAR

1 0 / – – – – – –

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 2 0 0 7

HOUR MINUTE AM/PM

– – : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : – – – –

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : 4 0 – –

Press [MENU] and select “CLOCK SET”.

Then press [B] to go to next step.

Select the current month.

Then press [B] to go to next step.

Select the current day.

Then press [B] to go to next step.

Select the current year.

Then press [B] to go to next step.

Select the current hour.

Then press [B] to go to next step.

Select the current minute.

Then press [B] to go to next step.

Select “AM” or “PM”.

To exit the CLOCK SET screen

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 MON 2 0 0 7

HOUR MINUTE AM/PM

0 5 : 4 0 P M AM

B PM

YES

Turn on the Unit for the First Time

VCR

Clock Setup

VCR

Operations described in this manual are

mainly based on the remote control.

Hint

• If you accidentally select Spanish or French and need English: Press

[MENU] and choose SELEC. IDIOMA or SELECTION LANGUE. Press [B]

and select ENGLISH. Finally, press [CLEAR/C.RESET].

• To add or delete channels in this unit, [SKIP/CH. G/K, H/L] button

works on the channel number memorized in this unit, [K/L] works on

all.

To Add or Delete Channels

VCR

CLOCK SET

MONTH DAY YEAR

1 0 / 0 1 – – – –

HOUR MINUTE AM/PM

– – : – – – –

E8C1UCD_EN.indd 8E8C1UCD_EN.indd 8 2007/04/03 9:48:552007/04/03 9:48:55

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philco CDV210HH8 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philco CDV210HH8 Manual

Product: