Manual Philco CDV210HH8 (page 3 of 26) (English)

501682

Zoom out

Zoom in

1/26

–

Precautions

1. Read Instructions - All the safety and operating instructions

should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions should

be followed.

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service

and, that for some specific reason, such as the possibility of

the loss of an authorization code for a CATV converter, is not

intended to be unplugged by the user for cleaning or any

other purpose, may exclude the reference to unplugging the

appliance in the cleaning description otherwise required in

item 5.

6. Attachments - Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub, in a wet basement, or near a swimming pool,

and the like.

8. Accessories - Do not place this video product on an unstable

cart, stand, tripod, bracket, or table. The video product may

fall, causing serious injury to a child or adult, and serious

damage to the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or

sold with the video product. Any mounting of the appliance

should follow the manufacturer's instructions and should use

a mounting accessory recommended by the

manufacturer. An appliance and cart

combination should be moved with care.

Quick stops, excessive force, and uneven

surfaces may cause the appliance and cart

combination to overturn.

9. Ventilation - Slots and openings in the

cabinet are provided for ventilation and to

ensure reliable operation of the video product and to protect it

from overheating, and these openings must not be blocked or

covered. The openings should never be blocked by placing the

video product on a bed, sofa, rug, or other similar surface. This

video product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is provided

or the manufacturer's instructions have been adhered to.

10. Power Sources - This video product should be operated only

from the type of power source indicated on the marking

label. If you are not sure of the type of power supply to your

home, consult your appliance dealer or local power company.

For products intended to operate from battery power, or

other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you are

unable to insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact your electrician

to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be routed

so that they are not likely to be walked on or pinched by

items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and the

point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA No. 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

(Fig. A)

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

ANTENNA

LEAD

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND

CLAMP

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

14. Lightning - For added protection for this video product

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind into

this video product through any openings as they may touch

dangerous voltage points or short-out parts that could result

in a fire or electric shock. Never spill liquid of any kind on the

video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service - Unplug this video product from

the wall outlet and refer servicing to qualified service person-

nel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by

following the operating instructions. Adjust only those

controls that are covered by the operating instructions as

an improper adjustment of other controls may result in

damage and will often require extensive work by a quali-

fied technician to restore the video product to its normal

operation.

e. If the video product has been dropped or damaged in any way.

f. When the video product exhibits a distinct change in

performance this indicates a need for service.

20. Replacement Parts - When replacement parts are required, be

sure the service technician has used replacement parts specified

by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire,

electric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in proper

operating condition.

22. Heat - This video product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

IMPORTANT SAFEGUARDS

E8C1UCD_EN.indd 3E8C1UCD_EN.indd 3 2007/04/03 9:48:512007/04/03 9:48:51

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Philco CDV210HH8 in the language / languages: English as an attachment in your email.

The manual is 7,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Philco CDV210HH8 Manual

Product: