506111
28
Zoom out
Zoom in
Previous page
1/58
Next page
22
Chapter 4: Router Configuration
Wireless Nano Router
www.phicomm.com
Static IP: Connections use static IP address assignment, it means your ISP provides a static or
fixed IP Address, Subnet Mask, Gateway and DNS setting.
PPPoE: Connections requires a username and a password.
MTU Size (in bytes): The default MTU (Maximum Transmission Unit) value is 1500 Bytes.
Sometimes you need to modify the MTU required by your ISP.
Manually configure the DNS server: Check this one if your ISP gives you one or two DNS IP
addresses. Otherwise, leave it unchecked, the DNS servers will be assigned from ISP dynamically.
Primary DNS Server: Enter the DNS IP address in dotted-decimal notation provided by your ISP.
Secondary DNS Server: Enter another DNS IP address in dotted-decimal notation provided by
your ISP.
Note: If you get Address not found error when you access a website, it is likely that your DNS
servers are set up improperly. You should contact your ISP for correct DNS server addresses.
Wireless Basic Settings
a) AP and Router Mode
Wireless Status: Choose Enable to enable the wireless function of the router, choose Disable to
disable the wireless function of the router.
Network Name (SSID): Enter a value of up to 32 characters. This is the wireless network name of
your AP/Router; you can give it a different name which can be easier for you to remember.
Country: Select your country from the pull-down list.
Channel: The router can choose the best channel automatically in most cases. Please try to
change the wireless channel if you notice interference problems with another nearby access
point, or the wireless performance is not as good as you expected.
Wireless Mode: If all of the wireless devices connected with this wireless router are in the same
transmission mode (e.g. 802.11b), you can choose "Only" mode (e.g. 11b only). If you have some
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm M1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm M1 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Phicomm M1

Phicomm M1 User Manual - German - 69 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info