506067
29
Zoom out
Zoom in
Previous page
1/53
Next page
300Mbps Wireless N Router
www.phicomm.com
24
Chapter 3: Router Configuration
MAC address table or select one from the scanning table. At the same time, the connecting
device should be in Lazy, Repeater or Bridge mode.
Repeater Mode: You can select the mode to extend the distance between the two WLAN
devices. Functioning as a WDS repeater, the connects to both a client card as an AP and to
another AP. In typical repeater applications, APs connecting to other APs equipped with WDS
functionality must also support WDS. In this mode, you need to add the MAC address of the
connecting device into the Routers AP MAC address table and the connecting client should be in
Lazy, Repeater or client mode.
Encryption Type: You can select WEP 64bits mode, WEP 128bits mode TKIP mode, AES mode for
security here.
Encryption key: Enter the key, the key format is decided by the encryption method you
selected.
Wireless Access Node MAC Address: Input the MAC address of the other wireless router.
Note: Two wireless routers must use the same channel, encryption type and encryption key.
DHCP Server
There are three submenus under the DHCP menu: DHCP, DHCP Clients List and Address
Reservation. Click any of them, and you will be able to configure the corresponding function.
DHCP
If you enable DHCP server of the router, the DHCP server automatically configures the TCP/IP
protocol for each computer in the LAN.
DHCP Server: If you disable the server, please make sure you have another DHCP server in your
network.
Start IP Address: The first address in the IP Address pool.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FWR-714N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FWR-714N in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info