506067
26
Zoom out
Zoom in
Previous page
1/53
Next page
300Mbps Wireless N Router
www.phicomm.com
21
Chapter 3: Router Configuration
You can allow/deny the computers connecting to the router wirelessly by entering the MAC
address with this feature.
If you only want MAC address (00:0A:EB:00:07:5F) to access the Wireless Network while others
cannot:
1: Choose Allow for the security policy.
2: Fill MAC address 00:0A:EB:00:07:5F in and click Save.
If you want MAC address (00:0A:EB:00:07:5F) cannot access the Wireless Network while others
can:
1: Choose Reject for the security policy.
2: Filling MAC address 00:0A:EB:00:07:5F in and click Save.
Advanced Wireless Settings
This section is to configure the advanced wireless setting of the Router, if you are not familiar
with the setting items in this page, it’s strongly recommended to keep the provided default
values, otherwise it may result in lower wireless network performance.
Beacon Interval: The interval for sending packets of the Beacon frame. Its value range is
20-1000 in unit of ms. The default is 100.
DTIM Interval: It indicates the interval of the delivery traffic indication message (DTIM). The
value range is between 1 and 255 milliseconds. The default value is 1.
Fragment Threshold: Set the fragmentation threshold. Packets larger than the size set in this
field will be fragmented. Too many data packets will lower the Wireless Network performance.
The Fragment Threshold value should not be set too low. The default value is 2346.
RTS Threshold: Set the RTS (Request to send threshold.) threshold. When the packet size is
larger than the preset RTS size, the wireless router will send a RTS to the destination station to
start a negotiation. The default value is 2347.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FWR-714N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FWR-714N in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info