506086
38
Zoom out
Zoom in
Previous page
1/45
Next page
150Mbps Wireless N Access Point
www.phicomm.com
33
Chapter 5: PoE (Power over Ethernet)
Chapter5: PoE (Power over Ethernet)
Equipped with Power Injector, the Access Point can be placed at any position regardless of the
location of the Power Adapter (within a certain distance range).
Hardware Overview of PoE
DC: Connect to the provided power adapter.
PoE: Connect to the LAN port of AP.
LAN: Connect to the Ethernet device with CAT5 Ethernet cable to transmit data.
Installation with PoE Injector
1. Turn off all your network devices, including the Switch, power injector and the AP.
2. Connect your Modem Router to the LAN port on the power injector with an Ethernet cable.
3. Plug the provided power adapter into the DC jack on the power injector, and the other end to
a standard electrical wall socket.
4. Connect your AP to the PoE (LAN) port on the power injector with an Ethernet cable.
Note: Provided with the power of DC 5V/1A, the cable between PoE port of passive PoE Injector
and the LAN port on Access Point is not more than 30m long, and all cables connected to the
passive PoE Injector should be no more than 100m long.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FWA-600ND at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FWA-600ND in the language / languages: English as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info