506097
31
Zoom out
Zoom in
Previous page
1/61
Next page
ADSL2/2+ Modem Router
www.phicomm.com
26
Chapter 4: Software Configuration
Starting IP Address: Enter the starting IP address for the DHCP server's IP assignment. Because
the default IP address for the Router is 192.168.1.1, the default Start IP Address is 192.168.1.2,
and the Start IP Address must be 192.168.1.2 or greater, but smaller than 192.168.1.254.
IP Pool Count: The max user pool size.
Lease Time: The length of time for the IP lease. After the dynamic IP address has expired, the
user will be automatically assigned a new dynamic IP address. The default is 259200 seconds.
DNS Relay: If you want to disable this feature, you just need to set both Primary and secondary
DNS IP to 0.0.0.0. If you want to use DNS relay, you can setup DNS server IP to 192.168.1.1 on
their computer.
If not, the device will perform as no DNS relay.
Primary DNS Server: Type in your preferred DNS server.
Secondary DNS Server: Type in your secondary DNS server.
Current Pool Summary: Click this button, you can view the IP addresses that the DHCP Server
gives out.
Note: If Automatically is selected in DNS Relay, this router will accept the first received DNS
assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s) during the connection
establishment. If Manually is selected in DNS Relay, it is necessary for you to enter the primary
and optional secondary DNS server IP addresses. After typing in the address, click SAVE button
to save it and invoke it.
DHCP Relay: Select Relay, the Router will work as a DHCP Relay. A DHCP relay is a computer that
forwards DHCP data between computers that request IP addresses and the DHCP server that
assigns the addresses. Each of the device's interfaces can be configured as a DHCP relay. If it is
enabled, the DHCP requests from local PCs will forward to the DHCP server runs on WAN side. To
have this function working properly, please run on router mode only, disable the DHCP server
on the LAN port, and make sure the routing table has the correct routing entry.
DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN side.
Note: If you select Disabled, the DHCP function will not take effect. DHCP Relay may be no use if
default route is not dynamic or static routing mode.
Advanced Setup
Choose Advanced Setup, you can see the submenus.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FD-224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FD-224 in the language / languages: English as an attachment in your email.

The manual is 5,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info