506090
30
Zoom out
Zoom in
Previous page
1/61
Next page
ADSL2/2+ Modem Router
www.phicomm.com
25
Chapter 4: Software Configuration
LAN
Router Local IP: These are the IP settings of the LAN interface for the device. These settings may
be referred to as private settings. You may change the LAN IP address if necessary. The LAN IP
address is private to your internal network and cannot be seen on the Internet.
IP Address: Modem Router’s local IP Address, you can access to the Web based Setup Wizard via
the IP Address, the default value is 192.168.1.1.
IP Subnet Mask: Enter the Subnet Mask, the default value is 255.255.255.0.
Dynamic Route: Select this option to specify the RIP (Routing Information protocol) version for
LAN interface, including RIP1, RIP2-B and RIP2-M. RIP2-B and RIP2-M are both sent in RIP2 format,
the difference is that RIP2-M using Multicast, while RIP2-B using Broadcast format.
Multicast: Select IGMP version, or disable the function. IGMP (Internet Group Multicast Protocol)
is a session-layer protocol used to establish membership in a multicast group. The ADSL ATU-R
supports both IGMP v1 and IGMP v2. Select Disabled to disable this function.
IGMP Snoop: Activate the IGMP Snoop function if you need.
DHCP: Select Enabled, then you will see the screen below.
The Modem Router will work as a DHCP server, it becomes the default gateway for DHCP clients
connected to it. DHCP stands for Dynamic Host Control Protocol. The DHCP Server gives out IP
addresses when a device is booting up and request an IP address to be logged on to the
network. That device must be set as a DHCP client to obtain the IP address automatically.
By default, the DHCP Server is enabled. The DHCP address pool contains the range of the IP
address that will automatically be assigned to the network clients.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FD-221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FD-221 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info