506090
24
Zoom out
Zoom in
Previous page
1/61
Next page
ADSL2/2+ Modem Router
www.phicomm.com
19
Chapter 4: Software Configuration
Internet
ATM VC: ATM settings are used to connect to your ISP. Your ISP provides VPI (Virtual Path
Identifier), VCI (Virtual Channel Identifier) settings to you. In this Device, you can totally setup 8
VCs on different encapsulations, if you apply 8 different virtual circuits from your ISP. You need to
activate the VC to take effect. For PVCs management, you can use ATM QoS to setup each PVC
traffic priority.
Virtual Circuit: Select the VC number you want to setup, PVC0~PVC7.
Status: If you want to use a designed VC, you should activate it.
VPI: Identify the virtual path between endpoints in an ATM network. The valid range is from 0 to
255. Please input the value provided by your ISP.
VCI: Identify the virtual channel endpoints in an ATM network. The valid range is from 32 to
65535 (1 to 31 is reserved for well-known protocols). Please input the value provided by y o u r I S P.
PVCs Summary: You can view the summary information about the PVCs.
QoS: Select the Quality of Service types for this Virtual Circuit, including CBR (Constant Bit Rate),
UBR (Unspecified Bit Rate) and VBR (Variable Bit Rate). These QoS types are all controlled by the
parameters specified below, including PCR (Peak Cell Rate), SCR (Sustained Cell Rate) and MBS
(Maximum Burst Size), please configure them according your needs.
Encapsulation: There are four connection types: Dynamic IP Address, Static Address,
PPPoA/PPPoE and Bridge Mode. Please choose the designed type that you want to use. After
that, you should follow the configuration below to proceed.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm FD-221 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm FD-221 in the language / languages: English as an attachment in your email.

The manual is 5,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info