694119

Phicomm CLUE - C230 Manual

35
Zoom out
Zoom in
Previous page
1/53
Next page
Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
67
WLAN
You device can conncect via WLAN, GPRS/3G or EDGE to the
internet.
With WLAN, you can access the internet wirelessy over a distance
up to 100 meters from the router. To access the internet via a
wireless connection, you need to look for an available wireless
network and connect to this network. The strength of the signal
depends on several factors and may therefore vary.
TURN ON WIRELESS FUNCTION AND CONNCECT TO WIRELESS
NETWORK
1.
Tap on the home screen on the menu key.
2.
Tap on System settings > Wireless & Networks.
3.
Activate WLAN by sliding the bar from OFF to ON to scan for
available networks in the area.
4.
Select a network to which you want to connect. If you select
an unsecured network, you are automatically connected. If
you select a secured network, you have to enter the network
key. Once the connection is established, the WLAN icon
appears in the status bar .
Alternatively, you can also work with the status bar directly:
1.
Wipe the status bar down and tap on .
2.
Tap on WLAN.
3.
Follow the step 5. and 6.
NOTICE:
Next time you use your device to detect Wi-Fi networks, you
will not be prompted to enter the network key of the
previously accessed Wi-Fi network (unless you perform a hard
reset which will erase custom settings on your device).
WLAN networks are self-discoverable, which means no
additional steps are required for your device to connect to a
WLAN network. It may be necessary to provide a username
and password for certain closed wireless networks.
SEARCH FOR WLAN NETWORK MANUALLY
1.
Tap on the homescreen on the menu key.
2.
Tap on System settings > Wireless & Networks.
68
3.
Activate WLAN by sliding the bar from OFF to ON and then
tap on WLAN.
4.
Tap the menu key and tap on Scan. The phone is now
searching for available WLAN networks and displays them in a
list.
5.
Tap on the WLAN network you want to connect to and follow
the instructions.
WLAN-NETZWERK MANUELL HINZUFÜGEN
1.
Tap on the homescreen on the menu key.
2.
Tap on System settings > Wireless & Networks.
3.
Activate WLAN by sliding the bar from OFF to On.
4.
Tap on WLAN and then on Add network .
5.
Enter the network SSID.
6.
Tap on Security, to select a securty type
7.
Enter the password if prompted.
8.
Confirm with Save.
NOTICE: Contact your wireless network provider to obtain
information about the exact settings for the SSID network.
WLAN NETWORK STATUS
If you are connected to a WLAN network or when a WLAN
network is available within your each, you can view the status. You
can set up your phone to get a notification when an open WLAN
network is detected.
Status bar: Once you are connected to a WLAN network, the
WLAN icon appears and informs you about the signal strength .
If the WLAN notification is enabled, you will be automatically
informed by this symbol when an open network has been
detected.
ENABLE WLAN NETWORK NOTIFICATION
1.
Turn on WLAN, if ist not already turned on.
2.
Tap on the homescreen on the menu key.
3.
Tap on System settings > Wireless & Networks > WLAN.
4.
Tap on the menu key > Advanced.
5.
Tap on the check box Network notification.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm CLUE - C230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm CLUE - C230 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Phicomm CLUE - C230

Phicomm CLUE - C230 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info