694119
17
Zoom out
Zoom in
Previous page
1/53
Next page
Copyright @ 2014 Phicomm Europe GmbH 2014. Print for private use only.
31
WLAN and mobile signal strength data will show up right by four
white bars.
White and blue bars in wireless or mobile
data display show the signal strength. Gray bars, however,
suggest that there is no full connection and it could cause a
malfunction in the connection.
Small gray arrows up / down in the bars indicate the exchange
of data with the Internet. Up arrow corresponds to data transfer
from your device to the internet and down arrow means data
transfer from the Internet to your device.
NOTIFICATIONS (STATUS BAR)
Notifications icons opens to display when recieving new messages,
set calendar events, clock or forwarded calls as well as your
current call status. You can enable the notifications panel to get an
information about your messages or calendar events and check
the carriers name.
Using the status bar, you also can ajdust the basic device settings,
such as WLAN, Bluetooth™ or Mobile data.
OPEN NOTIFICATION PANEL
Seeing new notification icon in status bar, tap and hold the status
bar and then slide your finger down to open up the status bar
(notification panel).
32
If there are many notifications just scroll down the screen to see
more notifications.
CLOSE NOTIFICATION PANEL
Tap and hold the bottom of the
notification panel and
slide your finger upwards on the
screen and release.
HANDLE SETTINGS WITH THE NOTIFICATION PANEL
Using the status bar, you also can ajdust the basic device settings,
such as WLAN, Bluetooth™ or Mobile data.
1.
Tap on the status bar and move downwards.
2.
Tap on .
3.
Tap on the function you would like to adjust.
4.
Tap on the back key or the home key to return to your home
screen.
USING SD CARD AS USB DISK DRIVE
Set your storage card as USB disk drive if you want to transmit
music, photos and other information to your phone storage card.
The device support Micro SD™ cards that also can be used in other
compatible devices.
SET UP SD CARD AS USB DISK DRIVE
1.
Connect your phone to your computer with a USB data cable.
You will get a notification in the status bar.
2.
Pull down the status bar.
3.
Tap on USB debugging connected.
4.
Tap on the check box USB debugging to activate it and
confirm with OK.
5.
Pull down the status bar again.
6.
Tap on Connected in / as … .
7.
Select an option.
DISCONNECT USB CONNECTION SAFETLY
1.
Pull down status bar.
2.
Tap on USB debugging connected.
3.
Tap on the check box USB debugging to disconnect from your
PC safely. You now can remove the data cable.
Pull down
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Phicomm CLUE - C230 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Phicomm CLUE - C230 in the language / languages: English as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Phicomm CLUE - C230

Phicomm CLUE - C230 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info