479064

Pfaff Tiptronic 1029 Manual

36
Zoom out
Zoom in
Previous page
1/40
Next page
Preparing
the
machine:
Sewing
foot:
Zipper
foot
Stitch
length:
2—3
Stitch
type:
Button
10
Thread:
Ordinary
sewing
thread
How
to
fit
the
zipper
foot
Insert
the
rear
pin
of
zipper
foot
in
rear
groove
F
and
push
the
shoe
up
until
the
front
pin
enters
groove
G.
This
zipper
foot
can
be
positioned
to
the
right,
to
the
left
or
in
the
middle,
depending
on
the
sewing
operation
involved
(Fig.
1).
Completely
concealed
zip
closure
Baste
in
zip
by
hand
first.
Push
the
zipper
foot
to
the
left
as
far
as
it
will
go.
Place
the
open
zip
under
the
foot
so
that
its
teeth
run
along
the
right
guiding
edge
on
the
sole
of
the
foot(Fig.
2).Sew
about
half
the
length
of
the
zip
at
the
required
width.
Leave
the
needle
down
in
the
material,
raise
the
zipper
foot
and
close
the
zip
(Fig.
3).
Lower
the
zipper
foot
again,
continue
the
seam
and
then
sew
across
the
end.
Sew
the
other
side
of
the
zip
at
the
same
margin.
Shortly
before
the
end
of
the
seam
leave
the
needle
down
in
the
material,
raise
the
zipper
foot
and
open
the
zip
(Fig.
4).
Lower
the
zipper
foot
again
and
sew
to
the
end.
Useful
hint
We
recommend
that
less
experienced
sewers
use
an
edge
guide
to
ensure
the
seam
is
straight
and
neat.
Inserting
zips
D
7
… 36 …


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-tiptronic-1029

Reset search

  • HI, can someone please help with steps of how to rethread the bobbin using the pfaff tiptornic 1029 model? Thanks in advance Submitted on 24-8-2020 at 01:20

    Reply Report abuse

    • On the right side of the machine you can put the empty bobbin on the little black hole and then slide it to the right with the machine threaded you can take the thread and loop it around the little silver button on the left side of the bobbin holding tray and then put the thread down into your bobbin. on the turn wheel on the right turn the centre knob so it disconnects the needle from going up And down then just press the foot pedal and it will fill the bobbin Answered on 17-9-2021 at 20:45

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Tiptronic 1029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Tiptronic 1029 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Tiptronic 1029

Pfaff Tiptronic 1029 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info