479033
10
Zoom out
Zoom in
Previous page
1/17
Next page
Raise
the
needle
bar.
Then
hold
the
needle,
loosen
screw
A
and
pull
the
needle
out
of
the
needle
holder.
Insert
a
new
System
130/705
H
needle
lwith
the
flat
side
of
its
shank
facing
toward
the
back)
and
push
it
up
into
the
needle
holder
as
far
as
it
will
go.
Tighten
screw
A.
The
thread
cutter
is
located
at
the
back
of
top
feeding
foot
22.
Remove
the
work
by
pulling
it
backwards
out
of
the
machine.
Place
the
threads
in
thread
cutter
slot
A
and
pull
them
downwards
to
Cut
them.
Changing
the
sewing
foot
To
release
the
sewing
foot
push
the
red
button
A.
When
attaching
a
sewing
foot
make
sure
studs
B
enter
slots
C.
Place
the
sewing
foot
under
the
sewing
foot
holder
and
hold
it
in
place
with
your
left
hand.
Lower
the
presser
bar
lifter
and
at
the
same
time
reposition
the
sewing
foot
so
that
studs
8
fit
in
slots
C.
If
the
sewing
foot
does
not
readily
snap
in
place,
press
against
screw
0
lightly.
Slot
E
and
screw
F
are
used
for
attaching
an
edge
guide
I
13
10


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-synchromatic-1209

Reset search

  • I have double checked the threading and bobbin insert. The needle thread picks up the bobbin thread but when I try to sow material the threads don't make stitches. I hope this makes ze sense. Please help, Karin Submitted on 20-11-2022 at 07:07

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Synchromatic 1209 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Synchromatic 1209 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Synchromatic 1209

Pfaff Synchromatic 1209 User Manual - German - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info