479025
48
Zoom out
Zoom in
Previous page
1/52
Next page
3:4
Maintenance and trouble-shooting
The machine skips stitches
The needle is not properly inserted. Push needle fully upwards, at side
facing the back.
The wrong needle is inserted. Use a needle system 130/705 H.
Needle is bent or blunt. Insert a new needle.
Machine is not properly threaded. Check how machine is threaded.
Needle is too small for thread. Use a larger needle.
Needle thread breaks
See reasons above. See above.
Thread tension is too tight. Adjust thread tension.
Thread is poor or has slubs in it, or has
become dry after too-long storage.
Only use good threads.
Thread is too thick.
Use needle with large eye (System 130 N).
Needle breaks off
Needle is not pushed fully in. Insert new needle and push fully in.
Needle is bent. Insert new needle.
Needle is too thick or too thin.
Insert new needle.
Needle is bent, and has hit the needle plate
because you are pulling or pushing the
fabric.
Let the machine feed the fabric.
Only guide the fabric lightly.
The bobbin case is not properly installed. When you insert the bobbin case, push
it fully into the stop.
Seam is sewn unevenly
The tension needs adjusting. Check needle thread tension.
Thread is too thick, slubbed or hard. Only use perfect threads.
The bobbin thread is unevenly wound. Do not wind thread free-hand, but run
it on through the winding tension.
Thread bunching at top or bottom side of
fabric.
Thread up correctly. Check needle
thread tension.
Trouble-shooting
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Select 1548 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Select 1548 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Select 1548

Pfaff Select 1548 User Manual - German - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info