750004
78
Zoom out
Zoom in
Previous page
1/130
Next page
Sewing
Sensormatic Free-Motion
Sensormatic Free-Motion Foot 6A
Activate to set the machine in Sensormatic free-motion
mode for presser foot 6A or some other sensormatic foot,
e.g yarn couching etc.
When sewing free-motion at low speed the presser foot
will raise and lower with each stitch to hold the fabric
on the needle plate while the stitch is being formed. At
higher speed, the presser foot floats over the fabric
while sewing.
Skipped stitches can occur if your fabric moves up and
down with the needle as you are stitching. Lowering the
presser foot height will reduce the space between the
presser foot and the fabric and eliminate the skipped
stitches.
To adjust the presser foot height in Sensormatic free-
motion mode, open the Free-Motion options window
and change presser foot height by touching + or to
increase or decrease presser foot height.
Note: Be careful not to reduce the presser foot height too much.
The fabric must still move freely under the presser foot.
Tie-Off Options
These options allow you program Tie-Off at the
beginning and at the end of a stitch. It is also possible to
program Thread Cut at the end of a stitch.
When touching the Tie-Off icon, three options open to
let you select different functions; Tie-Off Beginning, Tie-
Off End and Thread Cut.
Touch Tie-Off to close Tie-Off options window. Your
settings are shown under Active features in the
information area.
Note: For immediate Tie-Off, use the Tie-Off button, found on
the front of the machine.
Sewing with Tie-Off Options selected
Tie-Off button
Reverse button
The Tie-Off Beginning will be performed as soon as
you start to sew.
Press the Reverse button to perform Tie-Off End. The
action indicator lamp will be lit to indicate that the
machine will finish the stitch and do the Tie-Off.
When a Thread Cut is programmed, the machine will
automatically cut the threads after performing a
stitch. The needle and presser foot will raise.
Note: Stop sewing and press the Reverse button twice to
activate reverse sewing. The reverse indicator lamp will be lit.
No Tie-Off will be performed.
Press the Reverse button when sewing in reverse to activate
Tie-Off End. The action indicator lamp will be lit.
To go back to sewing forward, stop sewing in reverse and
press the Reverse button. No Tie-Off will be performed.
78
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Performance Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Performance Icon in the language / languages: English as an attachment in your email.

The manual is 11,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Performance Icon

Pfaff Performance Icon User Manual - German - 140 pages

Pfaff Performance Icon User Manual - Dutch - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info