750004
72
Zoom out
Zoom in
Previous page
1/130
Next page
Sewing
Stitch Limiting Options
Set the machine to stitch width safety or select the size
of the twin needle to limit the stitch width and stitch
positioning. This will minimize the risk of breaking a
needle when sewing with accessories that do not allow
the use of the entire stitch width.
Stitch Width Safety
Stitch Width Safety
When selected, the machine will only allow a centered
straight stitch to prevent damage to the needle, presser
foot and needle plate. Select stitch width safety when
using an accessory that only supports a centered needle
position e.g. straight stitch presser foot. Stitch width
safety will automatically be selected when the Straight
Stitch Needle Plate is attached to the machine and
cannot be deselected as long as the Straight Stitch
Needle Plate is attached.
When the Straight Stitch Needle Plate is removed you
will be given the option to keep stitch width safety
selected or to deselect it. When stitch width safety is
activated all twin needle sizes will be disabled as they
cannot be used with stitch width safety.
Note: The setting is reset at the start of a new project in
Getting Started or a new sewing session. Always make sure to
remove any accessory that requires this setting or select the
setting again after starting a new project or session.
Twin Needle
Twin Needle
When a twin needle size is selected, the stitch width and
stitch position of all stitches are limited according to the
selected twin needle size to prevent damage to the
needle, presser foot and needle plate. In Sewing Mode
the Active Features will show that a twin needle is
selected. When a twin needle size is selected, the stitch
width safety will be disabled as it cannot be used with a
twin needle.
Note: The setting is reset at the start of a new project in
Getting Started or a new sewing session. Always make sure to
remove any accessory that requires this setting or select the
setting again after starting a new project.
72
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Performance Icon at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Performance Icon in the language / languages: English as an attachment in your email.

The manual is 11,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Performance Icon

Pfaff Performance Icon User Manual - German - 140 pages

Pfaff Performance Icon User Manual - Dutch - 138 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info