750006
27
Zoom out
Zoom in
Previous page
1/32
Next page
25
Quilting
A quilt usually consists of three layers, two layers
of fabric with a layer of batting sandwiched
between.
To sew three layers together, you have a wide
variety of stitches and techniques to choose from.
Stitch-in-the-Ditch
Use the Fancy stitch foot 1A with IDT™ system.
Stitching in the ditch means using the guide on the
presser foot to follow the seams in the quilt blocks.
Begin by pin basting your quilt through all layers
with safety pins, starting from the center of your
quilt and working out. Place a pin every 6-8 inches
(15-20 cm).
Note: You can also use the optional Stitch-in-Ditch w
IDT™ system presser foot #820 925- 096.
&UD]\TXLOWVWLWFKLQJ
Embellish your quilt with decorative stitches.
The stitches can be sewn in a coordinating or
contrasting color. Decorative threads like rayon
embroidery or heavy cotton threads are sometimes
used.
Free-motion stippling
Free-motion stippling not only keeps the top,
batting and backing together, but it also adds
texture and interest to your quilt.
Free-motion stippling is done with the feed
dogs lowered. You move the fabric manually to
determine the stitch length.
1. Set your sewing machine for stippling by
selecting the straight stitch, number 00 (01 on
2.0).
2. Attach the optional Open Toe Free-Motion foot
#820 988-096.
3. Lower the feed dogs.
4. Pin baste your quilt layers and prepare your
quilt as explained under Stitch-in-the-Ditch
above.
Tip! Practice stippling on scraps of fabric and batting.
Sewing with a constant speed will help to keep the
stitches even.
5. Begin near the center of your quilt. Take one
stitch and pull the bobbin thread to the top of
the quilt. Take a few stitches right next to one
another to lock the threads.
6. Now move the quilt so that your stitching
creates swirls. The stitching should not cross
over itself, and should travel in a meandering
motion.
Handlook quilting
1. Baste the completed quilt top to the batting and
backing.
2. Thread the needle with an invisible
PRQRÀODPHQWWKUHDG8VHFRQWUDVWLQJRU
matching rayon or cotton thread in the bobbin.
3. Select the handlook quilt stitch, number 22 (21
on 2.0), and increase the needle thread tension
to 7-9.
4. Snap on the recommended presser foot 0A.
5. Engage the IDT™ system.
6. When you sew the stitch you should only see
your bobbin thread. Fine adjust the needle
thread tension as needed to produce the
desired effect.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Passport 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Passport 2.0 in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Passport 2.0

Pfaff Passport 2.0 User Manual - German - 32 pages

Pfaff Passport 2.0 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info