478548
23
Zoom out
Zoom in
Previous page
1/52
Next page
21
Presser foot pressure
The presser foot pressure does not need to
be adjusted for most fabrics. If you are
working with light or heavy fabrics then
you may need to adjust the pressure. In this
case set the adjusting screw as follow:
for heavyweight fabrics increase pres-
sure by turning the adjusting screw to
the right
for lightweight fabrics reduce pressure
by turning the adjusting screw to the left
Adjust the adjusting screw for normal
sewing work in such a way that its upper
edge protrudes 2 mm out from the top side
of the machine (see illustration).
Removing the presser foot
Turn the machine off.
Raise the needle(s) to the highest position.
Raise the presser foot and press the lever
at the rear of the presser foot holder. The
presser foot will be released automatically
from the holder.
Attaching the presser foot
Place the presser foot beneath the presser
foot holder, until the pin of the foot is dir-
ectly under the presser foot holder clamp.
Lower the presser foot holder and press
lever until the foot then clicks into place. Lift
the presser foot lever to check that the press-
ser foot is properly locked into place.
clamp
pin
lever
needle
lever
presser foot
holder
presser
foot lifter
Standard setting
Top side of
the machine
adjusting screw
2 mm
to increase
to reduce
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 4752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 4752 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 4752

Pfaff Hobbylock 4752 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info