478548
13
Zoom out
Zoom in
Previous page
1/52
Next page
11
Before the machine leaves the factory,
threads are already threaded and their ends
are cut off. Tie one of these thread ends to
the thread from a spool with an overhand
knot, raise the presser foot and pull the new
threads through the loopers. In order to
thread the needle threads, pull the thread
ends through until the knots reach the
needle eye. Cut the threads on both sides
of the knots. Rethread the eye of the needle
with the needle threading aid (see Pages 16,
18). With this procedure, you can save a
great deal of time when threading.
If the threads are not threaded in the machi-
ne, thread the upper looper thread (red) first,
then the lower looper thread (yellow), the
left needle thread (blue) and finally the right
needle thread (green). Two threading dia-
grams are located behind the looper cover
to help you correctly thread the machine.
Threads that are threaded incorrectly will
lead to irregular (skipped) stitches, broken
needles and uneven thread tension. There-
fore always make sure that all the threads
are perfectly threaded before beginning to
sew.
In order to replace spools, cut the threads
between the thread guides and the thread
guide plate. Thread the new threads in the
manner described opposite.
In order to make threading easier, set the
thread tension to “0”. After threading, reset
the thread tension to the desired number
(see Pages 30, 31).
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 4752 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 4752 in the language / languages: English as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 4752

Pfaff Hobbylock 4752 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info