614520
28
Zoom out
Zoom in
Previous page
1/32
Next page
28
1
2
3
Maintenance
Machine maintenance
An overlock machine requires more frequent maintenance
than a conventional machine mainly for two reasons:
A lot of lint is produced when the cutters are cutting
the the fabric.
An overlock runs at a very high speed and needs to be
oiled frequently to lubricate the internal working parts.
Cleaning
Turn off the main power switch and unplug the machine.
Open the front cover and remove all the lint using the
lint brush.
Close the front cover and wipe the exterior surface of
your machine with a soft cloth to remove any dust or
lint built up.
Oiling
Turn off the main power switch and unplug the machine.
To keep the machine running smoothly and quietly
the moving parts, pointed out on the picture, must be
lubricated often.
Use supplied sewing machine oil. Do not use any other
oil, it could damage the machine.
Wipe the machine surface to remove all excess oil before
sewing.
Replacing the movable upper cutter
Turn off the main power switch and unplug the machine.
The movable upper cutter should be changed when it
becomes dull. The upper cutter can be replaced according
to the following directions. If you are having any
dif culties, consult your authorized PFAFF® dealer.
Open the front cover and set the movable upper cutter
(1) in A position (See page 9).
Loosen the set screw (2) and remove the upper cutter
(1).
Turn the handwheel until the upper cutter holder is in
its lowest position.
Place a new upper cutter in the groove of the upper
cutter holder and tighten the set screw (2).
Make sure the front edge of the movable upper cutter
is 0.5-1.0 mm lower than the cutting edge of the
stationary cutter (3).
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 2.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 2.5 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 2.5

Pfaff Hobbylock 2.5 User Manual - German - 32 pages

Pfaff Hobbylock 2.5 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info