614520
22
Zoom out
Zoom in
Previous page
1/32
Next page
22 Stitches & sewing techniques
Flatlock sewing
A atlock stitch is made by sewing the seam and pulling the fabric apart to atten the seam. The atlock stitch
can be used both as a decorative construction stitch, sewing two pieces together (Standard atlock stitch), or for
embellishment on only one piece of fabric (Ornamental atlock stitch).
There are two ways to sew a atlock stitch. Either with the wrong sides of the fabric together to create a decorative
look, or with the right sides together, to create a ladder stitch.
Standard atlock stitch
Use the left or the right needle.
For 2-thread atlock: Engage the 2-thread converter
(see page 10). Thread the lower looper and the left (A)
or right (B) needle.
For 3-thread atlock: Thread the lower and upper
looper and the left (A) or right (B) needle.
Set the ATD to E for 2-thread atlock and to F for
3-thread atlock.
Place the wrong sides of the two pieces of fabric
together to sew a decorative stitch on the right side of
the garment.
Sew the seam, trimming the excess fabric. The needle
thread will form a V on the underside of the fabric. The
lower looper thread will pull into a straight line at the
fabric edge.
Unfold the fabric and pull on opposite sides of the
seam to pull the stitches at.
Ornamental atlock stitch
Place the movable upper cutter in the B position (see
page 9). The fabric should not be trimmed on this
stitch.
Follow steps 1-3 above.
Fold the fabric piece, wrong sides together, to sew a
decorative stitch from the right side of the garment (at
the fold).
Position the fabric so the seam is sewn with part of the
stitch extending off the fabric.
Unfold the fabric and pull on opposite sides of the
stitch to atten.
Tip: The upper looper thread is the prominent thread in the
atlock stitch. Place a decorative thread in the upper looper and
regular threads in the lower looper and needle.
Ladder stitch
To create a ladder stitch, sew with right sides of the fabric
together. The needle thread will be the prominent thread
that creates the ladder.
Standard atlock stitch Ornamental atlock stitch
3-thread ladder stitch
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 2.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 2.5 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 2.5

Pfaff Hobbylock 2.5 User Manual - German - 32 pages

Pfaff Hobbylock 2.5 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info