614520
16
Zoom out
Zoom in
Previous page
1/32
Next page
16 Threading
Needle threader
To make threading the needles easier, use the needle
threader included with the accessories.
Turn the handwheel so the needles are in their highest
position and lower the presser foot. Make sure one
of the rectangular markings of the needle threader is
pointing upwards. Place the thread from right to left in
the notch on the tip of the needle threader.
Hold the needle threader against the needle. Move
the needle threader down to the needle eye and press
gently against the needle, causing a small metal pin
to push the thread through the needle eye and form a
thread loop.
Use the needle threader to pull the thread loop out
behind the needle.
Changing thread
The following is an easy way to change threads:
Cut the thread in use near the spool, behind the guides
on the telescopic thread stand.
Remove the thread spool and place the new thread on
the spool pin.
Tie the end of the new thread to the end of the old
thread. Cut the thread tails to 2-3 cm (1”) in length and
rmly pull both threads to test knot security.
Raise the presser foot to release the tension discs.
Pull the threads through the machine one at a time
until the knots are in front of the needle. If the threads
do not pull easily, check for tangles on thread guides or
looping under thread stand.
Cut the thread behind the knot and thread the needle.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 2.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 2.5 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 2.5

Pfaff Hobbylock 2.5 User Manual - German - 32 pages

Pfaff Hobbylock 2.5 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info