614520
9
Zoom out
Zoom in
Previous page
1/32
Next page
9
A
B
B
A
B
B
A
B
Preparations
Needle information
This overlock uses a at shank industrial needle that
eliminates the possibility of inserting the needle backwards.
Do not attempt to use a standard household sewing machine
needle of any size or type in this overlock.
Use INSPIRA™ needle EL x 705 sizes 14/90 and 12/80,
supplied with this machine.
Changing the needles
Turn off the main power switch and unplug the machine.
Turn the handwheel toward you until the needles are at
the highest position.
Place a thick piece of fabric under the presser foot. Lower
the needles halfway into the fabric.
Loosen, but do not remove the needle clamp screw with
the allen key while you are holding the needles.
Note: When inserting needles into the A and/or B needle clamps it
is necessary to loosen the needle clamp screws for both A and B.
Remove the selected needle.
Hold the new needle with the at surface to the back.
Insert the needle into the needle clamp as far as it will go.
Note: We recommend using the hole in the needle threader to hold
the needle.
Securely tighten the needle clamp screw using the allen
key.
Note: Do not over-tighten the screw as this may cause the needle
clamp to be damaged.
Movable upper cutter
Disengaging, position B
Turn off the main power switch and unplug the machine.
Turn the handwheel toward you until the upper cutter is
raised to the highest position.
Open the front cover.
Pull the movable cutter knob to the right as far as it will
go.
Turn the knob toward you counter clockwise until the
cutter clicks into the locked position B.
Engaging, position A
Open the front cover and pull the movable cutter knob to
the right as far as it will go.
Turn the knob clockwise until the cutter clicks into the
cutting position A.
A. Overlock left needle
B. Overlock right needle
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 2.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 2.5 in the language / languages: English as an attachment in your email.

The manual is 6,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 2.5

Pfaff Hobbylock 2.5 User Manual - German - 32 pages

Pfaff Hobbylock 2.5 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info