478547
21
Zoom out
Zoom in
Previous page
1/28
Next page
21
1
2
3
Replacing the stationary cutter
Turn off the main power switch and unplug the machine.
The stationary cutter should be changed when it becomes dull.
The stationary cutter can be replaced according to the following
directions. If you are having any difÀ culties, consult your dealer
to make the necessary adjustments.
1. Open the front cover and set the movable upper cutter (1) in
nonworking position.
2. Loosen the stationary cutter set screw (2) and remove the
stationary cutter (3).
3. Place a new stationary cutter in the groove of the stationary
cutter holder.
4. Tighten the stationary cutter set screw (2).
5. Return the movable upper cutter (1) to its working position.
6. Turn the handwheel so the needles are in their lowest
position.
7. Make sure the front edge of the movable upper cutter is 1-2
mm lower than the cutting edge of the stationary cutter.
Storage
When the machine is not in use, be sure to keep it unplugged.
Cover the machine with the vinyl cover to protect it from the
dust. Store the machine, so it is not exposed to direct sunlight or
humidity.
Servicing
If you have any questions regarding service and/or operation,
contact the store where the machine was purchased.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobbylock 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobbylock 2.0 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobbylock 2.0

Pfaff Hobbylock 2.0 User Manual - German - 28 pages

Pfaff Hobbylock 2.0 User Manual - Dutch - 28 pages

Pfaff Hobbylock 2.0 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info