478211
54
Zoom out
Zoom in
Previous page
1/67
Next page
Faults
and
how
to
remedy
them
Cause:
1.
Machine
skips
stitches
Needle
not
inserted
correctly.
Wrong
needle used.
Needle bent
or
blunt.
Machine
threaded
improperly.
Needle
too
thin
for
thread
used.
2.
Needle
thread
breaks
For
any
of
the
above
reasons.
Thread
tension
too
strong.
Poor-quality
or
knotty
thread used,
or
thread that
has
become
too
dry
by
excessive
storage.
3.
Needle
breaks
Needle
not
pushed
up
as
far
as
it
will
go.
Needle
bent.
Needle
too
thin
or
too
thick.
Needle
bent
and
strikes
needle
plate
because
work
is
pushed
or
pulled.
Bobbin
case
improperly
inserted.
4.
Seam
is
not
uniform
Tension
out
of
adjustment.
Thread
too
thick,
knotty
or
hard.
Bobbin
thread
wound unevenly.
Remedy:
Push
needle
up
as
far
as
it
will
go,
its
flat
shank
side
facing toward
the
back.
Insert
system
130/705
H
needle.
Insert
new
needle.
Check
threading.
Select
needle
according
to
Needle
Chart.
See
par.
1
above.
Regulate thread
tensions.
Use
only
good-quality
thread.
Insert
new
needle
and
push
it
up
as
far
as
it
will
go.
Insert
new
needle.
See
Needle
Chart.
Let
machine
feed the
work
alone.
Only
guide
the
material
lightly.
When
inserting
the
bobbin
case,
push
it
in
as
far
as
it
will
go.
Check
upper
and
lower
tensions.
Use
first-class
thread
only.
During
bobbin
winding,
do
not hold
thread
in
hand,
but
pass
it
through
the
bobbin
tension
stud.
Thread machine
properly
and
check
both
tensions.
Kinks
appear
on
top
and
bottom
of
material.
54


Need help? Post your question in this forum.

Forumrules
1

Forum

pfaff-hobby-303

Reset search

  • Bottom threads knots up and dont have a manuel to read how to fix it Submitted on 30-5-2022 at 16:51

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Hobby 303 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobby 303 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info