Manual Pfaff Hobby 1032 (page 68 of 72) (English)

478202

Zoom out

Zoom in

1/72

Maintenance and troubleshooting

Sewing problems and their solutions

Problem/Cause Remedy

1. The machine skips stitches

The needle is not properly inserted. Push needle fully upwards. Flat side

facing the back.

Wrong needle is in use. Use needle system 130/705 H.

Needle is bent or blunt. Insert a new needle.

The machine is not properly threaded. Check how the machine is threaded.

Needle is too small for thread. Use a larger needle.

2. Needle thread breaks

See reasons above. See above.

Thread tension is too tight. Adjust thread tension.

Thread is poor or has slubs in it, or has Only use good quality threads.

become dry after overlong storage.

Thread is too thick. Use needle with large eye (system 130 N).

3. Needle breaks off

Needle is not pushed fully in. Insert new needle and push fully in.

Needle is bent. Insert new needle.

Needle is too thick or too thin. See needle table (Page 59, 60).

Needle is bent, and has hit the needle Only guide the fabric lightly.

plate because you are pulling

or pushing the fabric.

The bobbin case is not properly inserted. When you insert the bobbin case,

push it fully into the stop.

Pull lightly on the end of the thread to

make sure bobbin case is secure.

4. The seam is sewn unevenly

The tension needs adjusting. Check needle thread tension.

Thread is too thick, slubbed or hard. Only use good quality threads.

The bobbin thread is unevenly wound. Do not wind thread by hand.

Make sure thread is pulled solidly into

bobbin tension spring.

Thread loops at top or underside of fabric. Re-thread machine.

Check the needle thread

tension.

5. The machine does not feed or feeds irregularly

Sewing lint has collected between Remove needle plate,

the feed dog teeth rows. remove lint with brush.

6. The machine is running with difÀ culty

There are thread remnants Remove the threads and apply a drop

in the hook ways. of oil to the hook.

Important notes: Before changing presser feet and needle the master switch must be

switched off. Do not attempt to sew without fabric under the presser foot.

When leaving the machine, even for only a short time, switch off the master switch.

This is important if there are any children nearby.

I have searched the manual and you tube to find out how to use the button hole foot. Is there a video on how to use this foot? Thank you Submitted on 31-7-2022 at 22:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Hobby 1032 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Hobby 1032

Pfaff Hobby 1032 User Manual - German - 72 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Pfaff Hobby 1032 Manual

Product: