478197
14
Zoom out
Zoom in
Previous page
1/28
Next page
14
Check the tension of the bobbin by holding the loaded bobbin
case in one hand. With one hand under the bobbin case, hold
the tail of thread and watch as the thread flows out of the
bobbin case. A slight bounce should cause the bobbin case to
slide down the thread. If the thread slides out of the case as
you pick it up, it needs more tension. If it barely moves
down the thread or doesn’t move at all, it needs less tension.
Use a small screwdriver to turn the largest set screw on the
bobbin case to adjust tension. Make very, very small adjustments.
Be very careful not to remove the screw as it is very small and
difficult to find if lost. Remember, righty (clockwise) tighty, lefty
(counter clockwise) loosey.
To place the bobbin into the machine:
1. Insert the bobbin into the bobbin case.
2. Holding the bobbin case pull the thread through the slot.
3. Draw the thread down and under the spring, making sure the thread is
in the highest position of the bobbin case.
4. Place the bobbin case in the machine. Always listen for the pop as it
engages in the machine.
We suggest using a soft bristle brush to wipe out the bobbin case and the bobbin area. Canned air only blows
the lint around. By using the soft bristle brush you collect the dust on the brush.
Each day before you start quilting, unthread your machine past the take up lever and remove the bobbin case,
place a small drop of oil in the bobbin hook area before you begin quilting. This will clean out the fuzz and lint.
Place a drop of oil in the bobbin hook area. Turn your machine on to run at the slowest setting.
TIP: Lint has a tendency to build up in the bobbin case especially with cotton threads. A
tiny amount of lint can cause a huge headache! Check the bobbin each time you change it
to keep it clean.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff GrandQuilter 18.8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff GrandQuilter 18.8 in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff GrandQuilter 18.8

Pfaff GrandQuilter 18.8 User Manual - German - 44 pages

Pfaff GrandQuilter 18.8 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info