749982
44
Zoom out
Zoom in
Previous page
1/90
Next page
4:4
Sewing mode
Stitch settings
Your machine will set the best settings for each
selected stitch. You can make your own adjustments
on the selected stitch. The setting changes will only
affect the selected stitch. Your changed settings will
be reset to default when selecting another stitch. The
changed settings are not automatically saved when
turning your machine off. You can save an adjusted
stitch in a personal menu to keep the adjustments.
For some stitches you can change more than
one setting in each setting control. This will be
indicated by a button symbol in the middle of the
control. Touch the button symbol to toggle between
different stitch settings.
If a stitch can be balanced, a long touch symbol
appears in the lower right corner in the middle of
the control. Long touch the button symbol to open
balance setting.
Note: Some stitches can be balanced but can not toggle
between two stitch settings (width/positioning) and/or
(length/density). If touching once on a button symbol
with a long touch the stitch control will not change its
appearance. This indicates that the selected stitch cannot
toggle between the two stitch settings.
Note: When trying to exceed minimum or maximum
settings for the stitch controls, a warning sound will be
heard. The default value is shown in white.
Stitch width
Increase or decrease the stitch width using + and -.
The number above the control shows stitch width in
mm.
Stitch positioning
For certain stitches the stitch positioning icon is
shown instead of the stitch width control. Use +
to move the needle to the right and - to move the
needle to the left. The number above the control
shows the needle position in mm in relation to
center needle position. For straight stitches the
machine has 37 needle positions.
It is possible to change the needle position of all
stitches that are less than 9 mm wide. Touch the
button symbol in the middle of width/position
control to toggle between stitch width and stitch
positioning. The stitch position can only be changed
to the limit of the maximum stitch width. Changing
the stitch position will also limit the stitch width
adjustment.
Stitch width
Stitch positioning
Long
touch
Button
symbol
Stitch width/Stitch positioning
Stitch length/Stitch density
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 720 in the language / languages: English as an attachment in your email.

The manual is 11,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 720

Pfaff Expression 720 User Manual - German - 92 pages

Pfaff Expression 720 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info