749982
38
Zoom out
Zoom in
Previous page
1/90
Next page
3:6
Machine settings & buttons
10
20
30
40
50
2
1
mm
inch
00
Buttons and indicators
Presser foot up and extra lift toggle
Touch this button to raise the presser foot. Press
the button once more and the presser foot will raise
to extra lift position and the needle will raise to up
position.
Presser foot down and pivot toggle
Touch this button to lower the presser foot
completely. Press the button once more to raise
the presser foot to pivot height. The presser foot is
lowered automatically when you start to sew.
Stitch restart
When you have stopped sewing in the middle of a
stitch, press stitch restart to return to the beginning
of the stitch again without having to reset any
special settings you have made.
If pressing the stitch restart button while sewing,
the stitch will be nished and the machine will then
stop.
Speed control
This function enables you to easily reduce the
sewing speed. Just touch the speed control button to
reduce the speed by half. To return to normal speed,
deselect the button.
Long press on the button and use the slider to
choose from four different speed levels.
Presser foot up and extra lift toggle
Presser foot down and pivot toggle Stitch restart
Immediate tie-off
Needle up/down
Speed control
Set desired speed limit using the slider, then close
the pop-up. The next time you touch the speed
control button, the speed will be reduced to the
limit you have chosen. The limit will be shown
at the top left corner on the screen. You can sew
without closing the pop-up.
Immediate tie-off
Press immediate tie-off while sewing and your
machine sews a few tie-off stitches and stops
automatically.
By touching the tie-off button once more while the
action indicator is lit, the function can be turned off.
The tie-off function can be programmed, see page 4:10.
Needle up/down
Press this button to move the needle up or down.
The setting of the needle stop position is changed
at the same time. When needle down is activated,
the indicator underneath the button is lit, the needle
will stop in the down position and the presser foot
will raise to pivot height.
You can also tap the foot control to raise or lower
the needle.
Start/stop
Reverse button
Reverse indicator Action indicator
Thread snips
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 720 in the language / languages: English as an attachment in your email.

The manual is 11,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 720

Pfaff Expression 720 User Manual - German - 92 pages

Pfaff Expression 720 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info