749982
26
Zoom out
Zoom in
Previous page
1/90
Next page
2:6
Preparations
D
E
CB
F
A
C
B
A
Threading for twin needle
Replacethesewingneedlewithatwinneedle.Make
surethatthepresserfootisraisedandtheneedleis
intheupposition.
1. Placethethreadonthespoolpinandtaspool
capoftherightsize.Raisetheauxiliaryspool
pin.Slideonalargespoolcapandafeltpad.
Placethesecondthreadonthespoolpin.
Note: Hold threads with both hands to prevent them from
slacking while threading. This ensures that the threads
will be positioned properly in the threading path.
2. Pullthethreadsintothethreadguidebypulling
themfromthefronttotheback(A).Make
surethethreadsclickintoplace.Thenpullthe
threadsunderneaththebobbinwinderthread
guide(B)onthepre-tensiondisc(C).
3. Threaddownthroughtheright-handthreading
slotandthenupwardsthroughtheleft-hand
threadingslot.Makesurethatyoupassone
threadtotheleftandonethreadtotheright
sidesofthetensiondisk(F).
4. Bringthethreadsfromtherightintothetake-up
lever(D)anddownintheleft-handthreading
slot.Makesurethatonethreadisinsidethe
needlethreadguide(E)andtheotherone
outside.Makesurethatthethreadsdonot
becometwistedtogether.
5. Threadtheneedles.
Note: Activate twin needle and select the correct twin
needle width in Settings menu. This will limit the width
of all stitches for that needle size to prevent damage to
presser foot and needle.
Note: The weight and irregular surface of specialty
threads such as metallic increases the amount of friction
on the thread. By reducing the tension, the risk of needle
breakage is prevented.
Note: Do not use asymmetrical twin needles (G), since it
may damage your sewing machine.
Thread sensor
Whenthebobbinthreadisrunninglow,the
machinestopsandapop-upappearsonthescreen.
Replacewithawoundbobbinandcontinuesewing.
Note: When the bobbin thread is almost empty, the
bobbin thread low pop-up appears on the screen. You can
continue sewing without closing the pop-up before the
bobbin thread runs out completly.
G
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Pfaff Expression 720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Pfaff Expression 720 in the language / languages: English as an attachment in your email.

The manual is 11,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Pfaff Expression 720

Pfaff Expression 720 User Manual - German - 92 pages

Pfaff Expression 720 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info